Paxton

The Paxton Net2 Silent Operation Card turns off the beep on a Net2 access control reader. Present the card to the reader within two minutes of powering it up, and the reader stops sounding every time someone presents a card or fob.Where a Silent Net2 Reader Makes SenseA reader beep is useful feedback at a busy main entrance, but it can become a nuisance elsewhere. On a hospital ward at night, in a library, or on a door next to a meeting room, a reader that chirps with every entry adds up to constant low-level noise disruption. Presenting this card will set the reader to silent operation, so those doors keep the security of access control without the noise. It's quickest to do during the installation of the system, while readers are being powered up anyway.Which Paxton Readers the Card Works With The Silent Operation Card is designed for Paxton's second-generation Net2 readers, the ones that include Genuine HID Technology™. It's worth confirming your readers are from that generation before ordering. For sites that want Net2 access control on quiet doors, this card is a simple, low-cost way to get it...

Paxton PaxLock Pro Euro Internal Lock for Net2 and Paxton10, EN179 Certified, Black 900-600BLThe Paxton PaxLock Pro is a battery-powered door handle with a proximity reader built into it, so you can bring a door under access control without running cable to it. This is the euro, internal version in black (900-600BL). It's made for securing inside doors. It fits any DIN standard lock, which keeps installation quick and simple.Running the PaxLock Pro Standalone or on a NetworkThe same handle works in three modes, and it has a clear upgrade path as your site grows.Standalone mode. For a single door, or a site that doesn't need an online system, the PaxLock Pro runs on its own. You need the door handle and a pack of cards or fobs, and each door is programmed at the handle itself.Net2. As part of a Net2 access control system, the PaxLock Pro talks to the Net2 server PC using the low-power and secure wireless technology of Net2Air. A Net2 PaxLock Pro door connects through a Paxton Net2Air Bridge (477-600), and every door is then managed centrally from the PC, with event reporting and remote management included.Paxton10. On a Paxton10 system, the handle connects to the server using Bluetooth® frequency-hopping through a Paxton10 wireless connector, and it can be managed from anywhere with an internet connection. Paxton10 also adds Bluetooth smart credentials, so staff can use their phones at the door.Wireless Access Control for Fire Doors and Emergency ExitsThe PaxLock Pro is FD30 and FD60 certified for fire doors and IK10 impact rated. That makes it a practical choice for internal doors where wiring a conventional reader would mean disruption to the building. It is also EN179 certified for emergency exits, provided it's fitted with Paxton's EN179 door kit. The kit and any other locking hardware are sold separately.Paxton Tokens and Accessories It Works WithThe built-in dual-frequency reader supports Paxton tokens, MIFARE® and HID® Prox, so it's often compatible with the cards and fobs a site already has in circulation. HID® needs an activation licence, bought separately. For a Net2 system, Paxton Net2 Proximity Key Fobs (695-644) are a reliable fob to issue, and Paxton10 key fobs (010-170) suit Paxton10 sites while also working on Net2.How to Install the PaxLock ProThe PaxLock Pro fits doors between 35mm and 62mm thick, and doors over 50mm need a separate fitting kit. Wiegand output isn't supported anywhere in the PaxLock range, which is worth knowing if you're linking into third-party door entry equipment. Paxton also makes an external version of the PaxLock Pro for doors that open to the outside, so this internal model is the right application for offices, corridors and meeting rooms within a networked system or a standalone setup.Starting in standalone mode keeps costs down on day one, and when you're ready to add more doors, the same handle moves onto a Net2 or Paxton10 network with no need to replace it. Every PaxLock Pro is backed by Paxton's fiv..

A Net2 Plus single door controller with a PoE+ power supply in a plastic cabinet, Paxton part number 682-284. It plugs straight into the existing LAN with a standard RJ45 plug, provided it is powered by a PoE switch or a PoE injector. No separate mains supply is needed.Supply voltage input of 36V to 57V DC (0.83A).On PoE+ (AT type 2): 1.5A output current, 20.4W output power. On AF (AT type 1): 0.8A, 10.36W.Two 12V DC outputs.Tamper switch and fitting kit. UL 294 rated.Operating temperature 0°C to +45°C. Not moisture resistant.Detected and configured from the Net2 software in the same way as any other Net2 access control unit...

A Paxton10 single door controller with a 12V 2A power supply, part number 010-751. Door controllers are the building blocks of a Paxton10 system. Each controls one door. One system can include up to 1000 of them.Two reader inputs for read in and read out control.Connector port to cascade up to three Paxton10 Wireless Connectors.Four inputs: tamper, 230V fail, door contact and RTE.Locally stored programming keeps the system working if the connection to the server is lost.Powered lock output of 12V DC/1A or 24V DC/500mA. Takes an optional 12V DC 7Ah backup battery.Paxton 5 year warranty.An intruder alarm can be integrated using the Paxton10 Alarm Connector (010-203), sold separately...

Paxton Proximity 10 card pack amber - 830-010APaxton Amber Proximity Cards Compatible with Paxton Switch 2 and Compact. Switch2 is a standalone access control system that uses a separate control unit and reader and does not need a PC to run it. This pack contains 10 amber cards.Paxton issues green, amber or red tokens to different types of user, which keeps management simple because the colour of a card shows the group it belongs to. New users can be added in seconds by presenting the enrolment card at the door, and additional card packs can be added easily. Simple function cards are included. A lost card can be voided using the shadow card for simple administration. These are the Amber cards, also available are Green or Red.Key featuresPack of 10 amber proximity cardsFor Paxton Switch2 and CompactFunction cards includedLost cards barred with the shadow card..

Paxton Proximity 10 card pack green - 830-010GPaxton Green Proximity Cards Compatible with Paxton Switch 2 and Compact. Switch2 is a standalone access control system with a separate control unit and reader, and it needs no PC. Each card in this pack of 10 is programmed with its own unique 8 digit number.Paxton uses token colour to separate types of user, so green, amber and red cards can be issued to different groups for simple management. New users are added in seconds by presenting the enrolment card at the door, and additional card packs can be added easily. Simple function cards are included. A lost card can be voided using the shadow card for simple administration. These are the Green cards, also available are Amber or Red. If you prefer key fobs, the matching green Switch2 fobs are part 820-010G.Key featuresPack of 10 green proximity cardsUnique 8 digit number on each cardFunction cards includedLost cards barred with the shadow card..

Paxton Red Proximity Cards Compatible with Paxton Switch 2 and Compact. Additional card packs can be added easily Simple function cards are included A lost card can be voided using the shadow card for simple administration. These are the Red cards, also available are Amber or Green...

Paxton Proximity 50 card pack in amber, sales code 830-050A. It holds 50 user cards for a Paxton Compact or Switch2 standalone access control system.Each card comes in a wallet with a matching shadow card. Write the user's name on the shadow card when you issue the card.To void a lost card, present its shadow card to the relevant readers on site.The first pack is enrolled by presenting its Enrolment card. Further packs are added by presenting the original Enrolment card, then the new one.Function cards for setting up the system are included.Packs come in a choice of colours for running coloured zones...

Paxton Proximity 50 card pack in red, sales code 830-050R. It holds 50 user cards for a Paxton Compact or Switch2 standalone access control system.Each card comes in a wallet with a matching shadow card. Write the user's name on the shadow card when you issue the card.To void a lost card, present its shadow card to the relevant readers on site.The first pack is enrolled by presenting its Enrolment card. Further packs are added by presenting the original Enrolment card, then the new one.Function cards for setting up the system are included.Packs come in a choice of colours for running coloured zones...

Advanced Function Card Pack for Proximity Compact & Switch2 SystemsUnlock the full potential of your Proximity Compact or Switch2 access control systems with this Function Card Pack, designed to enable a range of advanced features and flexible configurations.Easy InstallationTo activate the function card pack, simply present the original enrolment card followed by the enrolment card from this pack to your reader. This quick process enrols the function cards into your system, making them ready for use. Enhanced System FunctionalityEach card in this pack serves a specific role, giving you fine-tuned control over access permissions and system behaviour.Zone Cards (Green, Amber, Red)Manage user access by grouping tokens by colour: Presenting a zone card disables access for users with matching token colours. Present it again to re-enable access for that group. Ideal for creating access zones or managing temporary restrictions. Time Zone ActivationIntegrate time-based rules for access: Automatically enable or disable zone access based on a time clock schedule. Useful for managing shift-based access or securing areas after hours. Remote Release (Compact Systems Only)Reverts the system from time-controlled mode to default: Restores functionality of exit button contacts. Allows standard "press-to-exit" operations. Bar All UsersReset your system by invalidating all existing tokens: Prevents automatic access for all enrolled users. Perfect for installations that require manual token validation from the start. Card + PIN Integration (Compact Systems Only)Combine proximity access with Touchlock keypads: Enables dual authentication (card + code) for higher security. Relay Toggle FunctionSwitch the relay mode from momentary to latching: A valid token presentation will toggle the relay on or off. Useful for applications needing sustained activation. Key Benefits Seamless integration with Paxton Proximity and Switch2 systems Boosts security and operational flexibility Simple card-based configuration – no complex programming needed Supports zoning, scheduling, user management, and dual authentication Optimize your access control system with the Function Card Pack – the essential toolset for customized security management.  ..

Paxton Proximity 50 card pack in green, sales code 830-050G. It holds 50 user cards for a Paxton Compact or Switch2 standalone access control system.Each card comes in a wallet with a matching shadow card. Write the user's name on the shadow card when you issue the card.To void a lost card, present its shadow card to the relevant readers on site.The first pack is enrolled by presenting its Enrolment card. Further packs are added by presenting the original Enrolment card, then the new one.Function cards for setting up the system are included.Packs come in a choice of colours for running coloured zones...

Paxton10 cards, part number 010-427, made for use with a Paxton10 system and sold in a pack of ten. Each card is ISO format, the same size as a standard credit card.Can be printed on with a universal card printer, so the card can also be used as an ID card.Card and user information is stored in an encrypted, password protected sector.Issued by entering the user's details in the Paxton10 web-based software, then presenting the card to a Paxton10 Universal desktop reader (010-392).At the door, the user holds the card close to the reader. Access is granted or denied according to that user's Paxton10 permissions...

Replacement Enrolment Card - 899-001Paxton code 899-001 is a replacement enrolment card for Paxton Compact and Switch2 systems, for sites where the original enrolment card has been lost. It lets you enrol further packs of cards or fobs onto your readers.Each enrolment card is matched to a particular site, so Paxton needs to identify yours before it can be supplied. To do that, an existing function card from the site has to be sent to Paxton's support team. Paxton states that the card sent in for identification will not be returned.Key featuresReplaces a lost enrolment cardFor Paxton Compact and Switch2 systemsUsed to enrol extra card and fob packsSite identified from an existing function cardSpecificationsManufacturer: PaxtonSales code: 899-001..

Paxton 695-644 Net2 Proximity Key Fobs Overview These genuine Paxton Net2 proximity keyfobs (695-644) are the standard token for any business running a Net2 access control system. Supplied in a pack of 10 with a blue band, they give your team a compact, keyring-ready credential that works straight out of the pack once enrolled. What the 695-644 fob gives you Each fob carries a unique 8-digit number that is factory-encoded at manufacture. That number never changes, so there is no risk of two fobs sharing an identity across your system. Enrolling a user is straightforward: enter their details into the Net2 PC software, then present the fob to a compatible desktop reader to pull the number in automatically. Once that is done, the fob is live. Present it to any Net2 reader and access is granted or denied instantly based on the permissions you have set. The fob operates at 125kHz and uses Paxton's proprietary encoding, which includes a password exchange between the token and reader. That exchange means the credential cannot simply be cloned, adding a layer of security above basic proximity technology. Every 695-644 fob carries a lifetime guarantee from Paxton, so replacements under normal use are covered for the entire lifetime of your system. Carrying and identification The fob has a keyring hole, so it can go straight onto a user's existing keys. If you prefer to keep it separate, it clips onto a lanyard or badge reel just as easily. The blue band is the visual indicator that these are Net2 fobs, which matters in sites where staff carry multiple tokens. Fobs for other Paxton systems use different colours, so a blue band makes it immediately clear which system a fob belongs to. If you need lanyards to go with these, the AddACard lanyard range includes plain and printed options with breakaway clips. If your team already uses proximity ISO cards and you are looking to issue fobs alongside them, the Paxton Net2 Proximity ISO Cards use the same enrolment process and work on the same readers. Compatibility: Net2 only The 695-644 is designed for the Paxton Net2 system. It is not compatible with Switch2. If your system is Switch2, you need the Paxton 820-010 proximity key fob pack instead. If you are unsure which system you have, the blue band on existing fobs confirms Net2; green, amber or red bands indicate Switch2. To enrol these fobs, you will need a compatible Net2 desktop reader. The Paxton Net2 USB Desktop Reader is the best choice for this, connecting via USB with no additional configuration required. Specification Detail Part number695-644 (AddACard ref: PAX-695-644) Pack size10 fobs Colour bandBlue Technology125kHz proximity Unique ID8-digit, factory-encoded Compatible systemPaxton Net2 GuaranteeLifetime (Paxton) Paxton10 compatible: Paxton10 readers also read Paxton proximity tokens, so these can be used on a Paxton10 system as well as Net2...

Multi-format P50 reader Reads MIFARE® tokens Reads EM4100 tokens Reads Net2 tokens Low profile - less than 16mm deep About – The Proximity P series MIFARE® reader is suitable for use with Net2 systems. The reader is multi-format and can be used with a choice of access tokens both 125Khz and 13.56MHz including MIFARE®Classic protocol ISO 14443A as well as EM4100 and Paxton Net2 tokens. The reader is supplied with a black fascia only.  Operation – A token is read by holding it within close proximity of the reader. Once a token has been read the control unit looks up the access permissions of that user. Access is then granted or denied as appropriate. If access is granted the green LED flashes. If access is denied the red LED flashes. Now including Genuine HID Technology in the P50 Mifare readers, will now read HID 125kHz Proximity tokens when licensed with an activation card. If required these readers can still be enabled to have Wiegand output, via a separate activation card...

Paxton Proximity Keyfobs OverviewThe Paxton 820-010 proximity keyfob pack gives you 10 genuine Paxton fobs and 10 shadow cards, ready to enrol into a Proximity Compact, Easyprox Compact or Switch2 system. It suits businesses that need a straightforward, standalone token with no PC software, no network and no complexity.Pack Contents:10 x Paxton Proximity key fobs10 x Shadow CardsColours Available:Green (820-010G)Amber (820-010A)Red (820-010R) What comes in the pack and how it works Each pack contains 10 proximity keyfobs and 10 corresponding shadow cards, supplied in wallets. Once you enrol the pack by presenting the enrolment card to the reader, all 10 user fobs become valid and are ready to issue immediately. To issue a fob, take it from the wallet, write the user's name on the shadow card, and hand the fob over. The shadow card stays on file. If a fob is lost, presenting the shadow card voids it at the reader and the rest of the system carries on without interruption. Additional packs can be enrolled into the same system at any time, so you can grow your user base without reconfiguring from scratch. Paxton backs these keyfobs with a lifetime guarantee. Colour options and zone management The 820-010 pack is available in three colours: Green (820-010G), Amber (820-010A) and Red (820-010R). The colour band on each fob is the reader's way of distinguishing between zones or user groups on a Proximity or Switch2 system. If you run a site with different access levels, issuing different-coloured packs to different teams is a clean, practical way to manage it. All three colours are stocked and available from the same page. Compatibility: making sure you order the right fob These fobs work with Proximity Compact, Easyprox Compact and Switch2 systems. They are not designed for Paxton Net2. If your site runs Net2 with PC-based access control software, you need a different credential. The Paxton Net2 proximity keyfob is the correct token for Net2 systems. It carries a blue band and a unique 8-digit code enrolled through the Net2 software. Check the colour of your existing fobs before you buy. Green, amber or red bands mean you need the 820-010 range. And if you're unsure which fobs are right for your system, please get in touch with our team. Expanding or fine-tuning your system If you want to unlock the more advanced features of your Compact or Switch2 installation, such as colour-based zoning, card-plus-PIN, toggling output or barring all users, the Paxton Proximity function card pack adds those capabilities without any complicated programming. For most sites running the 820-010 keyfob packs, it is a natural next step once basic access control is in place. The 820-010 pack is the genuine Paxton proximity keyfob for Switch2 and Compact systems. It is straightforward to deploy, simple to manage day-to-day, and backed by a lifetime guarantee...

Paxton10 Desktop Reader OverviewTyping card numbers into an access control system by hand is slow, and one wrong digit means a user won’t be able to open a door. The Paxton10 Desktop Reader removes that step. Present a card or keyfob at your desk and the Paxton10 software picks up the token straight away, ready for you to add the user’s details and assign their access permissions. Sales code: 010-392 Supersedes: Paxton10 Desktop Reader (010-387) Connection: USB Token technologies: Paxton, MIFARE®, HID™ Prox, EM, FeliCa, NFC and DESFire Encrypted credentials: supports Paxton10 Encrypted cards and keyfobs Software: Paxton10 web-based software, accessed through your browser The desktop reader supports all token formats with no additional configuration required. To set it up, connect it via a USB port and log in to the Paxton10 software through your web browser. When a new token is presented, a new user record loads automatically so you can add the person’s details and set their access permissions. If the token already exists in the system, the assigned user’s record appears instead, which makes the reader just as useful for checking who a card or keyfob belongs to as it is for enrolment. To complete your Paxton10 system, browse our contactless cards, door entry key fobs and access control card readers. With the Desktop Reader on the office desk, every new card, fob and user can be added to the system in a matter of moments.  ..

About These Paxton MIFARE Classic 4K Key fobs This is a genuine Paxton proximity key fob, using MIFARE Classic 4K technology, for use with Net2 readers or any third-party reader that supports MIFARE. MIFARE is a registered trademark of NXP B.V., used here under licence, so this isn't a generic clone; it's the real technology Paxton's own systems are built around. Fobs are supplied in packs of 10. Setting up a new 4K keyfob Setting up a new fob is really straightforward: enter the user's details into the Net2 software, then present the fob to a desktop reader, and its unique number is read directly into the system. From that point on, presenting the fob to any Net2 reader instantly looks up the user's access permissions and grants or denies entry accordingly. There's no manual code entry needed once it's programmed. Completing Your System If you're setting this up from scratch, you'll also need a Net2 desktop reader to programme new fobs, and a Net2 Proximity MIFARE reader (P50) at the door itself. About Paxton Paxton is a UK-based designer and manufacturer of access control, door entry, and video surveillance systems, based in Brighton. Net2 is one of their core access control platforms, widely installed across commercial, education, healthcare, and residential sites throughout the UK, and MIFARE-based fobs and cards are among the most common credentials used with it. Paxton10 compatible: Paxton10 readers also read MIFARE® tokens, so these can be used on a Paxton10 system as well as Net2...

The Paxton Net2 hands-free keyfob, sales code 690-222, is an active token that can be read from inside a pocket or handbag. Paxton suggests it for gates, barriers, loading doors and users who are disabled or elderly.Maximum hands-free read ranges: P38 up to 850mm, P50 up to 1100mm, P75 up to 2000mm, P200 up to 2500mm, long range reader up to 5000mm.Hands-free range needs a reader fitted with a hands-free interface. On other Paxton proximity readers it works as a standard passive token.Uses one CR2032 battery, which can be replaced.Operating temperature 0°C to +55°C. Not moisture resistant.Measures 49mm x 28mm x 11mm. Enrolled using the standard desktop reader.Paxton notes that site conditions can affect radio range, so the maximums are not achieved in all cases...

The Paxton desktop reader with keyboard output, sales code 214-326, connects by USB and types a token's number wherever the cursor is on screen. Paxton intends it for third-party applications or for sites where Net2 software is not installed locally, such as when using Net2Online in a browser, which is a Net2 Pro feature.Powered over USB, 4.75V to 5.25V DC, 100mA or less.No other connections or configuration necessary.With Net2 it needs v3.09 or later software. MIFARE card support needs v4.17 or later.Indoor use only, operating temperature 0°C to +49°C.The cursor must be in the right field before a card is presented, since the number is typed wherever it sits.For routine enrolment in Net2, Paxton recommends the Net2 desktop reader, USB (514-326) instead...

The Paxton Net2 desktop reader, sales code 514-326, sits next to the PC and plugs into a USB port. It is used to add tokens to a Net2 system and to identify lost tokens.Reads Paxton and EM tokens, plus MIFARE tokens (UID only).Powered from the USB port at 5V, 100mA. No other connections are needed.Presenting a new token opens the Net2 new user wizard with the card number filled in.Presenting a known token brings up that user's record.Operating temperature 0°C to +55°C. Not moisture resistant.Measures 115mm x 75mm x 19mm.It does not read magnetic stripes. For magstripe cards Paxton offers the proximity and magstripe version, 350-910...

The Paxton10 keyfobs (010-170) are proximity key fobs designed specifically for a Paxton10 access control system and supplied in a pack of 10. Each keyfob stores its card and user information in an encrypted, password-protected sector, and Paxton backs every one with a lifetime guarantee.Issuing Paxton10 Keyfobs to Your UsersEnter the user's details into the Paxton10 web-based software, then present the keyfob to a Paxton10 Universal desktop reader (010-392) to register it. From then on, when the user holds the fob close to any proximity reader on the site, their credentials are checked, and access is granted or denied according to the permissions set in the Paxton10 system. If a token goes missing, it can be invalidated in the software, so the lost fob no longer opens any doors.A Proximity Key Fob Built for Everyday UseThe keyfobs are durable, water-resistant and wash-proof, so one left in a pocket on laundry day is built to survive the machine. Paxton now supplies this 10-pack with a blue ring, and the white ring version has been phased out. The colour change makes no difference to how the fobs work. The smart, compact shape sits comfortably on a key ring.Choosing the Right Paxton Fob for Your SystemPaxton makes separate fob packs for each of its systems, so it's worth matching the pack to what's on your doors.Paxton10. This 010-170 pack is the one to order.Net2. The Paxton Net2 Proximity Key Fobs (695-644) are made for the Paxton Net2 access control system.Switch2 and Compact. Standalone Switch2, Proximity Compact and EasyProx Compact systems use the Paxton Proximity 10 Key Fob Pack (820-010), which includes shadow cards so a lost fob can be voided.Hands-free. For users who need hands-free entry, the Paxton10 Bluetooth Handsfree Fob (010-690) works up to 10 metres from a Paxton10 reader. For a Paxton10 site, the 010-170 pack gives you ten tough, secure fobs ready to issue...

Paxton 692-148 Net2 ISO MIFARE Printable Cards 13.56MHzThe Paxton 692-148 Net2 ISO MIFARE card is a printable contactless credential designed for use with compatible Paxton Net2 access control systems.Operating at 13.56MHz, each card uses NXP MIFARE technology and is programmed with a unique eight-digit identification number. The card can be enrolled within Net2 software and assigned to an individual user, allowing access permissions to be managed for employees, contractors, visitors or members.The blank white PVC surface can be personalised with photographs, names, job titles, company logos, text and other identification details using a compatible plastic card printer. This allows organisations to combine visual identification and contactless access control on a single credential.This version does not include a magnetic stripe or signature panel.Key features:Compatible with Paxton Net2 access control systemsNXP MIFARE contactless technology13.56MHz operating frequencyProgrammed with a unique eight-digit identification numberBlank white printable PVC surfaceSuitable for full-colour and monochrome personalisationNo magnetic stripeNo signature panelStandard CR80 ISO card size of approximately 86mm × 54mm760-micron card thicknessSuitable for employee ID, membership and access control cardsPaxton manufacturer part number: 692-148Supplied in packs of 10 cards Paxton10 compatible: Paxton10 readers also read MIFARE® tokens, so these can be used on a Paxton10 system as well as Net2...

The Paxton Net2 desktop reader, proximity and magstripe, sales code 350-910, connects to the PC by USB. It reads both proximity tokens and magnetic stripe cards when adding users to a Net2 system or identifying a lost token.Reads Paxton and EM4100/02 proximity tokens.Reads magnetic stripe cards.Plugs into a USB port, 5V at 100mA. No other connections are necessary.A new token opens the Net2 new user wizard with the card number entered. A known token brings up that user's record.Operating temperature 0°C to +55°C. Not moisture resistant.Measures 145mm x 90mm x 37mm.For MIFARE tokens Paxton offers the USB desktop reader (514-326), which reads MIFARE UIDs but has no magstripe...