Paxton

The Paxton Net2 Watchprox (698-574) is designed to be attached to a watch or bracelet for easy access through Net2 system controlled doors. The Watchprox tokens are supplied in packs of 10.Available Colours:Silver (698-574SL)Black (698-574BL)To issue a Watchprox token you will need to enter the intended user’s details using the PC software. The token number is then registered by presenting the Watchprox to the desktop reader. Once programmed into the software the token is ready for use. Simply present the token to a reader, the access permissions will be instantly looked up and access granted or denied as appropriate. Paxton tokens use Hitag2 technology with proprietary encoding which includes an authentication protocol in the form of a password exchange between the token and the reader. This provides an additional layer of security for your system. Paxton10 compatible: Paxton10 readers also read Paxton proximity tokens, so these can be used on a Paxton10 system as well as Net2...

A Paxton Proximity reader in a cast metal housing with a satin chrome finish, part number 390-747, for Switch2 and Net2 systems. Because it is already housed in metal, nearby metal affects its operation less, so it can go on metal door frames and car park reader posts.IPX7 rated and suitable for external use.Supplied with security screws and key. A backplate helps with accurate mounting.Genuine HID technology: reads HID 125kHz Proximity tokens when licensed.Can be enabled for Wiegand output via an activation card.Green LED flashes when access is granted. Red LED flashes when it is denied...

The Paxton10 Hands-free Keyfob uses Bluetooth® technology to support contactless, hands free range up to 10 metres from the reader. Operation – To issue the keyfob, the user information can be entered into the Paxton10 web-based application. The keyfob is easily added to the system by presenting the fob to a compatible Paxton10 desktop reader – use 010-387. When the fob is in readable vicinity of a reader then it will grant or deny access as per the configuration in the application. Should the battery fail then there is an override on these fobs which enables close use (within 10cm) and it will operate as a standard fob. Main Features Hands-free long range fob compatible with a Paxton10 system and readers Can also be used as touch functionality with Paxton10 readers Long lasting user changeable battery life with backup RFID token which doesn’t require a separate power source..

Paxton10 VR Reader OverviewThe Paxton10 VR reader (010-254) is Paxton’s vandal resistant reader for doors where it will get heavy use or could be damaged. It combines an IK10 impact rating and IP67 waterproofing with a rugged metal surround held by four security fixings, so it’s built for external use in all conditions. It only works on Paxton10 systems. For a tough reader on Net2 or Switch2, the Paxton Proximity Metal Reader (390-747) is the one to look at. Paxton sales code: 010-254 Compatible system: Paxton10 Door or Video controller Impact rating: IK10 Weather rating: IP67 Token technology: Paxton, EM, MIFARE® DESFire® CSN, HID® Prox 125kHz, FeliCa and NFC Bluetooth®: built in, with token, touch-to-enter and long range modes Cable: 5 metres supplied, extendable with Belden 8723 Warranty: Paxton 5 years One Reader for Cards, Fobs and Smart Devices This vandal proof reader reads all of those token types at the same time. If your staff already carry EM, MIFARE or HID Prox cards, the reader can accept them alongside new credentials. Paxton’s own datasheet rates its encrypted Paxton tokens higher for cloning resistance than the other formats, which makes Paxton10 key fobs the best choice for new users. Built-in Bluetooth® also lets people use their smartphone through the Paxton app. For hands-free entry, the reader also works with the Paxton10 Bluetooth Handsfree Fob (010-690). Installing the VR Reader The colour-coded wires connect colour for colour to the controller. Because the cable exits from the centre of the back, drilling and mounting are accurate. Keep the reader off metal surfaces and away from other proximity readers so it keeps its full read range. Once it’s fitted, you can enrol tokens in seconds with the Paxton10 Desktop Reader (010-387).    ..

Paxton 690-333 Net2 Hands-Free KeycardThe Paxton 690-333 Net2 Hands-Free Keycard gives secure long range contactless access control, letting users gain entry without physically presenting the card. It is designed for use with Paxton's Net2 access control systems and suits sites where convenience and accessibility matter most, such as car parks, loading bays and buildings used by people with mobility challenges...

Paxton Proximity Reader Clip-On Cover, 50mm, In and Out Many sites install two P50 readers side by side, one for staff tapping in, one for tapping out. It's a simple way to track exactly when someone enters and leaves a building. Without a visual difference between them, it's easy for someone to tap the wrong reader and log an inaccurate time. This clip-on cover solves that with a clear "In" or "Out" label fitted directly onto the reader's fascia. It's a simple plastic clip-on accessory, 100mm x 50mm, that fits over an existing P50 reader (353-467) without needing any rewiring or reconfiguration. Is This the Right Cover for Your Reader? This cover is built specifically for the Paxton P50 reader; it isn't compatible with the P38, P75, or other Paxton reader sizes. If you're not sure which reader you have installed, check the model printed on the reader itself before ordering, since a cover sized for the wrong reader simply won't fit. Don't have a P50 reader yet? The Paxton P50 proximity reader is compatible with Net2 and Switch2 systems and is an excellent entry system for a wide variety of uses. Speak with our team if you're interested in a full system setup; they can recommend the right one for your needs. About Paxton Paxton is a UK-based designer and manufacturer of access control, door entry, and video surveillance systems, based in Brighton. Their Net2 and Switch2 systems are widely used across commercial, education, healthcare, and residential sites throughout the UK, and the P-series readers, including the P50, are among their most widely installed reader ranges...

The Paxton Net2 USB/RS485 converter, sales code 455-482, links the Net2 server PC to the RS485 data line that runs to the door controllers. It plugs into a USB port on the PC, which then detects the control units automatically.Black plastic enclosure suitable for wall mounting. A USB lead is provided.Needs no separate power supply.Onboard termination resistors, switched into circuit with a jumper.Data line in Cat5 or Belden 8723, 1,000 metres maximum, wired as a single daisy chain. Star and spur wiring are not permitted.Controllers keep working standalone if the PC is off. Events are stored and sent when it comes back online.Paxton advises checking with its support team for compatible versions of Net2 software...

A pack of ten green Switch2 hands-free keyfobs, Paxton part number 860-010G. The fob is read from inside a pocket or handbag. Paxton names loading doors and disabled or elderly users as cases where this helps.Read range of 0.85m to 2.5m on P series readers and KP series keypads fitted with a hands-free interface.Up to 5m read range with the Paxton long range reader.Works in passive mode as a standard keyfob with all other Paxton proximity readers.Each fob comes with a matching shadow card. Write the user's name on the shadow card when the fob is issued.Presenting a shadow card to the readers on site invalidates its fob if it goes missing.On an existing site, add the pack by presenting the original Enrolment card followed by this pack's Enrolment card...

Paxton Proximity 50 keyfob pack in amber, sales code 820-050A. It holds 50 user keyfobs for a Paxton Compact or Switch2 standalone access control system.Each fob comes in a wallet with a matching shadow card. Write the user's name on the shadow card when you issue the fob.To void a lost fob, present its shadow card to the relevant readers on site.The first pack is enrolled by presenting its Enrolment card. Further packs are added by presenting the original Enrolment card, then the new one.Function cards for setting up the system are included.Packs come in a choice of colours for running coloured zones...

Paxton Proximity 50 keyfob pack in green, sales code 820-050G. It holds 50 user keyfobs for a Paxton Compact or Switch2 standalone access control system.Each fob comes in a wallet with a matching shadow card. Write the user's name on the shadow card when you issue the fob.To void a lost fob, present its shadow card to the relevant readers on site.The first pack is enrolled by presenting its Enrolment card. Further packs are added by presenting the original Enrolment card, then the new one.Function cards for setting up the system are included.Packs come in a choice of colours for running coloured zones...

Paxton Proximity 50 keyfob pack in red, sales code 820-050R. It holds 50 user keyfobs for a Paxton Compact or Switch2 standalone access control system.Each fob comes in a wallet with a matching shadow card. Write the user's name on the shadow card when you issue the fob.To void a lost fob, present its shadow card to the relevant readers on site.The first pack is enrolled by presenting its Enrolment card. Further packs are added by presenting the original Enrolment card, then the new one.Function cards for setting up the system are included.Packs come in a choice of colours for running coloured zones...