ICS

ICS Sliding Adjustable L Brackets for Standard Maglocks - SDGI-LThe SDGI-L is a sliding adjustable L bracket from ICS for standard size magnetic locks. Made from anodised aluminium, it lets the lock be moved backwards and forwards or set at an angle, helping you line it up with the armature.A cavity and cut out built into the bracket carry the cable, which makes wiring easier and keeps it protected. The bracket is straightforward to fit.Key featuresSliding adjustable L bracketFor standard maglocksAnodised aluminiumAdjusts backwards, forwards and at an angleCable cavity and cut out..

ICS Solenoid Bolt for Standard Door Applications, 12V DC - Power to Lock - EB300The EB300 is an ICS solenoid bolt. It runs on 12V DC and is the fail safe version, so the bolt throws when power is applied and withdraws when power is cut.It can be fitted horizontally or vertically, which gives a choice of positions on the door and frame. The bolt and its keep share the same footprint.Key features12V DC power inputFail safe, power to lockHorizontal or vertical fittingSpecificationsBolt: 166mm (l) x 56mm (w) x 32mm (d)Keep: 166mm (l) x 56mm (w) x 32mm (d)Model: EB300..

ICS Solenoid Bolt 12/24V DC Power to Lock EB195The ICS EB195 is an electric drop bolt for access controlled doors. It is a fail safe (power to lock) design, so the bolt withdraws when power is removed.The body is stainless steel and vandal resistant, with built in logic circuitry. An auto relock timer can be set to 0, 3, 6 or 9 seconds. It accepts a 12V or 24V DC supply and can be fitted horizontally or vertically, with a keep to receive the bolt.Key featuresFail safe operation: power to lockRuns on 12V or 24V DCStainless steel, vandal resistant bodyAuto relock delay of 0, 3, 6 or 9 secondsHorizontal or vertical fittingSpecificationsBolt size: 210 x 25 x 41 mmKeep size: 100 x 25 x 10 mm..

ICS Solenoid Bolt 12V DC with Key Override Power to Unlock EB260-NThe ICS EB260-N is a stainless steel electric drop bolt that stays locked when unpowered and withdraws when power is applied. That fail secure behaviour keeps the door locked during a power cut.A Euro profile key override gives a mechanical way through the door without power. The bolt relocks automatically after a selectable delay of 0, 3, 6 or 9 seconds. ICS lists it as tested to 500,000 cycles. It can be fitted horizontally or vertically. Check the supply voltage needed for your system before ordering.Key featuresFail secure operation: power to unlockEuro profile key overrideAuto relock timer with 0, 3, 6 or 9 second settingsTested to 500,000 cyclesStainless steel constructionSpecificationsSize: 260 x 30 x 48 mm (maximum depth)..

ICS Solenoid Bolt, 25mm Flush Mount, Monitored, Power to Lock - EB180The EB180 is a monitored solenoid bolt from ICS with a 25mm flush mount stainless steel body. It can be installed horizontally or vertically and has built in logic circuitry.The bolt works on a power to lock (fail safe) basis and runs on 12 to 24V DC. It is vandal resistant and an auto relocking timer can be set to 0, 3, 6 or 9 seconds. Monitoring reports the bolt state to your access control panel. The matching keeper plate is sold separately as the EB180-KEEPER.Key features25mm flush mountStainless steelMonitoredFail safe (power to lock)Vandal resistantAuto relocking delay of 0, 3, 6 or 9 secondsSpecificationsSupply: 12 to 24V DCSize: 210 x 25 x 41 mm..

ICS Solenoid Bolt, Power to Lock, Glass Door Applications, 12V DC, Fire Rated (FR-EB300)The ICS FR-EB300 is a fire rated solenoid bolt for glass door applications. It is the fail-safe version: it locks when power is applied and releases when power is removed.It is UK fire tested to FD30 and FD60 under BS EN1634:1. ICS states it provides 30 or 60 minutes of integrity performance with no reduction in the overall doorset performance under BS 476: Part 22: 1987 or EN 1634-1.The bolt can be installed horizontally or vertically. Its auto-relocking timer delay can be set to 0, 3, 6 or 9 seconds.Key featuresUK fire tested to FD30 and FD60Tested to BS EN1634:112Vdc power inputFail-safe (power to lock)Mounts horizontally or verticallyRelocking delay selectable at 0, 3, 6 or 9 secondsSpecificationsModel: FR-EB300Dimensions: 166 x 56 x 32 mm (l x w x d)Country of origin: Taiwan..

ICS Solenoid bolt, Power to Lock, Monitored, 12V DC - EB200NLW-38The EB200NLW-38 is a monitored electric drop bolt from ICS that runs on 12V DC. It works on a power to lock (fail safe) basis, so the bolt withdraws when power is removed.As well as reporting the bolt, it gives additional door monitoring so the system knows whether the door is shut. ICS has tested it to 500,000 cycles. An auto relocking timer can be set to 0, 3, 6 or 9 seconds to give the door time to close before the bolt throws.Key featuresElectric drop boltFail safe (power to lock)Additional door monitoringTested to 500,000 cyclesAuto relocking delay of 0, 3, 6 or 9 seconds12V DC..

ICS Standalone Weather Resistant Proximity Reader Kit EPX10-1The EPX10-1 is a standalone access control kit from ICS. It brings together a weather resistant proximity reader, a programmer and 10 tokens in one box.The reader housing is ABS plastic and is suitable for external mounting. It is fully programmable through the supplied programmer and runs from a 12V DC supply. The reader measures 116 x 75 x 22 mm.Key featuresKit includes reader, programmer and 10 tokensFully programmable standalone operationWeather resistant ABS plastic housingSuitable for external mounting12V DC supplySpecificationsWeather rating: IP65Reader size: 116 x 75 x 22 mm..

ICS Standalone Keypad and Proximity Reader DG800-NThe ICS DG800-N combines a keypad and a proximity reader in one standalone unit, so users can gain entry with a token, a PIN or both. It stores up to 1000 plus 10 cards, tokens and PINs.It is built for exposed positions, with a die cast aluminium body that resists vandal attack and an IP65 weather rating. A backlit keypad helps in poor light, while LED displays with audible tones confirm each action. It runs on 12 to 24V AC or DC and wires in through terminal connections.Key featuresKeypad and proximity access in one unitUp to 1000 plus 10 cards, tokens and PINsVandal resistant die cast aluminiumIP65 weather resistanceBacklit keypad with LEDs and audible indicationSpecificationsOperating voltage: 12 to 24V AC or DCDimensions: 120 x 76 x 21 mm..

ICS Standalone Narrow Keypad and Proximity Reader - DG160The ICS DG160 is a narrow standalone reader that combines a PIN keypad with proximity access. It is rated IP65 for weather resistance and is vandal resistant. It controls a door on its own without a separate controller, letting users enter with a PIN, a proximity card or a token. Its IP65 rating makes it suitable for external use. Five plain white proximity cards come in the box to get started.Key featuresVandal ResistantAluminiumVoltage: 12V DCBuilt in anti-tamper switch2 LED displaysCapacity: 1000+10 proximity cards, tokens and PINs5 plain white proximity cards includedSpecificationsDimensions: 152 x 44 x 24 mm (h x w x d)Country of origin: China..

ICS Standalone Proximity Reader EPX-10The ICS EPX-10 is a standalone proximity reader. It holds up to 2,000 users in non volatile memory, so enrolled users are kept if power is lost.Programming is done with an infrared programmer and the unit is fully programmable to suit the site. The ABS plastic housing is weather resistant for use at external doors. It runs on a 12V DC supply.Key featuresUp to 2,000 usersNon volatile memoryInfrared programmingWeather resistant ABS plastic housing12V DC supplySpecificationsWeather rating: IP65Size: 115 x 75 x 21 mm..

ICS Standalone Weather & Vandal Resistant Backlit Keypad - DG-15LDThe ICS DG-15LD is a standalone backlit keypad for external use. Its die-cast aluminium body is weather resistant and vandal resistant. It allows up to 20+1 PIN codes and runs on 12 to 24Vdc.Dual relay outputs give multi-control. Red, yellow and green LEDs work alongside an audible indication.Key featuresDual relays output for multi-controlBacklit keypadAllows up to 20+1 PIN codesWeather resistant and vandal resistantAudible indication3 LED displays: Red, Yellow and GreenSpecificationsOperating voltage: 12~24VdcHousing: die-cast aluminiumDimensions: 77 x 64 x 123mmPacked weight: 0.65 kgWarranty: 1 yearCountry of origin: Taiwan..

ICS Standard Architectural Z and L Bracket for 500kg Standard Maglocks 500ZLDCThe ICS 500ZLDC is an architectural Z and L bracket for fitting a standard maglock where the door and frame do not give a flat mounting face. The L bracket carries the magnet on the frame and the Z bracket sets the armature in position on the door.It is supplied with a cover and is made from anodised aluminium. Check that your lock is a standard size ICS magnet before ordering.Key featuresArchitectural Z and L bracket with coverFor standard maglocksAnodised aluminium..

ICS Standard Surface Maglock, 1200lbs, Fire Rated (FR-U10010)The ICS FR-U10010 is a fire rated standard surface maglock with up to 1200lbs of holding force. It is UK fire tested to FD30 and FD60 under BS EN1634:1 and provides 30 or 60 minutes integrity performance. The housing is aluminium with a nickel plated armature and it runs on 12 or 24V DC. This is the unmonitored, fail safe version; a monitored version is available as the FR-U10020.Key featuresUK fire tested to FD30 and FD60 under BS EN1634:130 or 60 minutes of integrity performanceNickel plated armature with aluminium housingRuns on 12 or 24 VdcUp to 1200lbs holding forceMonitored version available: FR-U10020SpecificationsMagnet: 268 x 67 x 40 mm (l x w x d)Armature plate: 185 x 61 x 17 mm (l x w x d)Gross weight (packed): 4.7kgCountry of origin: Malaysia..

ICS Standard Surface Maglock, Monitored with Door Status, 1200lbs HF, 12/24V DC - FIRE RATED - FR-U10020DSUThe ICS FR-U10020DSU is a fire rated surface mount magnetic lock with up to 1200lbs holding force. It runs on 12 or 24 Vdc and is fail safe, so the door releases when power is removed. Lock monitoring and door status monitoring report back to the access control system. The magnet and armature come in an aluminium finish with a separate mounting plate.Key featuresRuns on 12 or 24 VdcAluminiumUp to 1200lbs holding forceMonitoredFire RatedDoor Status MonitoringFail safe30 or 60 minutes of integrity performance under BS 476: Part 22: 1987 or EN 1634-1, with no reduction in overall doorset performanceSpecificationsMagnet: 266 x 68 x 40 mm (l x w x d)Armature plate: 185 x 62 x 16 mm (l x w x d)Mounting plate: 266 x 40 x 5 mm (l x w x d)Packed weight: 4.7 kgCountry of origin: Malaysia..

ICS Standard Surface Maglock, Monitored, 1200lbs HF, 12/24V DC - FIRE RATED - FR-U10020The ICS FR-U10020 is a fire rated surface mount maglock with up to 1200lbs holding force, running on 12 or 24 Vdc. It is monitored and has a status LED. Being fail safe, it releases when power is removed. The aluminium housing pairs with a nickel plated armature. An unmonitored version is listed as FR-U10010.Key featuresUK fire tested to FD30 and FD60 under BS EN1634:1Status LEDNickel plated armature with aluminium housingRuns on 12 or 24 VdcHolding force: Up to 1200lbsFail safeSpecificationsMagnet: 268 x 67 x 40 mm (l x w x d)Armature plate: 185 x 61 x 17 mm (l x w x d)Packed weight: 4.7 kgCountry of origin: Malaysia..

ICS Standard Transom Housing 1m ARCH1-10The ICS ARCH1-10 is a 1m aluminium transom housing that holds one standard maglock. ICS lists it for use with its A-10020M magnet, which is sold separately and gives a holding force of 1200lbs (545kg) in this housing.It fits horizontally across the transom with one cut out and is supplied with a mounting plate and armatures. The housing is suitable for external use. ICS also offers versions with a DS suffix where door status monitoring is needed.Key featuresHouses one standard maglock (sold separately)1m length for horizontal transom fittingFor use with the ICS A-10020MSupplied with mounting plate and armaturesSuitable for external useSpecificationsHolding force with A-10020M: 1200lbs (545kg)Material: aluminium..

ICS STD Armature Housing - U520SThe ICS U520S is a surface mount housing for the armature plate of a standard size magnetic lock. It covers the armature where it fixes to the door leaf, giving a neater finish and protecting the plate and its fixings.This is the large version of the housing, made in aluminium with an aluminium finish to match ICS standard maglocks. The maglock is not included.Key featuresHousing for standard maglock armaturesLarge surface mounting designAluminium construction and finishMaglock not includedSpecificationsNet weight: 0.43 kgCountry of origin: Malaysia..

ICS Surface armature housing for mini maglock with door status monitoring - A-320MDSThe A-320MDS is a surface housing for the armature of an ICS mini maglock. It covers the armature plate on the door leaf for a neater, protected finish.Door status monitoring is built in, so the access control system can report whether the door is closed or open.Key featuresSurface housing for the mini maglock armatureDoor status monitoring built inNeater finish on the door leafMade in the United KingdomSpecificationsNet weight: 0.15 kgModel: A-320MDS..

ICS Surface armature housing for standard maglock with door status monitoring - A-520SDSThe A-520SDS is a surface housing for the armature of a standard ICS maglock. It covers the armature plate on the door leaf and gives a neater finish than leaving the plate exposed.This version includes door status monitoring, so the access control system can tell whether the door is shut or has been left open.Key featuresSurface fitting housing for the maglock armatureSuits standard size ICS maglocksDoor status monitoring built inTidier finish on the door leafSpecificationsModel: A-520SDS..

ICS Surface armature mounting plate for Mini Maglocks - 300BPThe ICS 300BP is a surface mounting plate for the armature of a mini magnetic lock. It provides a fixing base on the door so the armature meets the magnet squarely.It is listed as an accessory for the ICS 10001, 10002, 10004 and 10005 mini maglocks and has an aluminium finish to match them. The lock and armature are not included.Key featuresArmature mounting plate for mini maglocksSurface mountingAluminium finishSuits ICS 10001, 10002, 10004 and 10005SpecificationsCountry of origin: China..

ICS Surface housing for SL500 micro shearlock - BR500The ICS BR500 is a surface housing for the SL500 micro shear lock. It lets the shear lock be fitted on the surface of the frame and door rather than being recessed, which is useful where the frame cannot be cut.The housing is supplied on its own; the SL500 lock is bought separately. Check the available space on the frame against the dimensions below before ordering.Key featuresSurface housing for the ICS SL500Avoids recessing the shear lockHousing only, lock not includedSpecificationsDimensions: 170 x 80 x 140 mmPackage weight: 0.55 kgCountry of origin: Taiwan..

ICS Surface Mount Armoured Door Loop 850mm DL850The ICS DL850 is a surface mount armoured door loop with an 850mm cable length. It carries cable from the frame to the door leaf for electric locks and monitoring contacts, with an armoured sleeve to protect the cable as the door opens and closes.Where a fire rated loop is needed, ICS offers the separate FR-DL850.Key featuresArmoured cable protection850mm cable lengthSurface mountingFire rated version available separately as FR-DL850..