ICS

ICS Mini Z + L Kit - U300ZLThe U300ZL is a Z and L bracket kit from ICS for its mini magnetic locks. Z and L brackets let a maglock and its armature be fitted where the frame or door does not give a flat face for direct fixing.The kit has an aluminium finish. Confirm that your lock is from the ICS mini range before ordering, since standard size maglocks need their own brackets.Key featuresZ and L bracket kitMade for ICS mini magnetsAluminium finish..

ICS Monitored Double Electromagnetic Door Lock (Standard Magnet) - A-10040The A-10040 is a monitored double magnetic lock from ICS, based on its standard magnet, for securing a pair of doors. Each magnet holds with up to 1200lbs of force, in a single aluminium housing.Monitoring reports the lock state back to the access control system and red and green status LEDs show it at the door. The armatures are electroless nickel plated. Supply voltage is selectable between 12 and 24V DC and the lock is fail safe, releasing the doors when power is removed.Key featuresDouble maglock for pairs of doorsHolding force up to 2 x 1200lbsMonitoredRed and green status LEDAluminium housingElectroless nickel plated armaturesSpecificationsSupply: 12 to 24V DC, selectable..

ICS Monitored double mini magnet - A10005The A10005 is a monitored double mini magnetic lock from ICS for securing a pair of doors with one unit. It gives up to 600lbs of holding force on each door, housed in aluminium.Red and green status LEDs show the lock state at a glance and the armatures are electroless nickel plated. Supply voltage can be selected between 12 and 24V DC. It is a fail safe lock, so the doors are released whenever power is cut.Key featuresDouble mini maglockHolding force up to 2 x 600lbs (2 x 272kg)MonitoredRed and green status LEDAluminium housingFail safeSpecificationsSupply: 12 to 24V DC, selectable..

ICS Monitored Electric Door Lock with 1500lbs Holding Force - ML360M-12The ML360M-12 is a monitored electric lock from ICS with a stainless steel body. It gives a holding force of 1500lbs and a side load rating of 500lbs.This version runs on 12V DC and is fail safe, releasing the door when power is removed. Monitoring lets the access control panel report the state of the lock.Key featuresHolding force 1500lbsSide load up to 500lbsStainless steelMonitoredFail safeSpecificationsSupply: 12V DC..

ICS Monitored Fail-safe Electric Lock (FD30 + FD60 rating) - FIRE RATED - FR-ML350The FR-ML350 is a monitored fail safe electric lock from ICS, fire tested for use on fire doors. It carries FD30 and FD60 ratings, has been tested to BS EN1634:1 and holds a one hour UK fire certificate.The lock is made from stainless steel and gives a holding force of 1500lbs with a side load rating of 500lbs. Being fail safe, it releases when power is removed. Check the voltage required for your system when ordering.Key featuresFD30 and FD60 ratedFire tested to BS EN1634:1One hour UK fire certificateHolding force 1500lbs, side load 500lbsStainless steelMonitored, fail safeSpecificationsSupply: 12V DC (24V DC to order)Size: 46 x 25 x 210 mm..

ICS Monitored Micro Weather Resistant Surface Maglock, 300lbs, 12/24V DC - U10003F/SThe U10003F/S is a monitored micro magnetic lock from ICS for surface mounting. Its stainless steel housing and sealed electronics give an IP67 weather rating, so it can be fitted outdoors as well as inside.It holds with up to 300lbs (136kg) of force. Supply voltage is selectable between 12 and 24V DC and the lock is fail safe. ICS lists a matching Z bracket for this micro magnet under code U-LZ150.Key featuresMicro maglock, surface mountHolding force up to 300lbs (136kg)Stainless steel housingSealed electronics, IP67MonitoredFail safeSpecificationsSupply: 12 or 24V DC, selectable..

ICS Monitored Mini Magnet (A-10002)The ICS A-10002 is a monitored, surface mount fail safe mini maglock from the ICS Entry range, running on 12 or 24V DC. It has with an aluminium housing and electro-less nickel plated armature. A green and red status LED shows the lock state at the door and the monitoring output lets your access control system confirm that the lock is secure. ICS backs it with a three year warranty.Key featuresSelectable 12~24 Vdc operating voltageAluminium housingElectro-less nickel plated armatureFail-SafeGreen and red status LEDMonitored (an unmonitored version is available as EAAM10001)SpecificationsNet weight: 1.8kgWarranty: 3 yearsCountry of origin: China..

ICS Monitored Mini Stainless Steel Weatherproof Maglock, 12V DC - Rear Cable Entry - G600M-BCEThe G600M-BCE is a monitored mini magnetic lock from ICS in stainless steel, with the cable leaving from the rear of the unit so the wiring can run straight into the frame out of sight.The lock is IP65 weather resistant and vandal resistant, with a holding force of up to 600lbs (272kg). It runs on 12V DC and is fail safe, releasing the door when power is lost. Monitoring lets the access control panel confirm the lock state.Key featuresRear cable entryStainless steelIP65 weather resistantVandal resistantHolding force up to 600lbs (272kg)Monitored, fail safeSpecificationsSupply: 12V DC..

ICS Monitored Mini Stainless Steel Weatherproof Magnet, 12V DC - G600MThe G600M is a monitored mini magnetic lock from ICS with a stainless steel body. It is weather resistant to IP65 and vandal resistant, so it suits doors where the lock is exposed.Holding force is up to 600lbs (272kg) and the lock runs on 12V DC. It is fail safe, releasing the door when power is cut. Monitoring reports the lock state back to the access control system. A rear cable entry version is made under code G600M-BCE.Key featuresMini maglockStainless steelIP65 weather resistantVandal resistantHolding force up to 600lbs (272kg)Monitored, fail safeSpecificationsSupply: 12V DC..

ICS Monitored standard magnet - A-10020The ICS A-10020 is a standard size surface mount magnetic lock with door status monitoring. It holds with a force of up to 1200 lbs and runs on 12 or 24V DC, with the voltage set on the lock to match your power supply.The magnet body sits in an aluminium housing and the armature is electroless nickel plated. A red and green status LED shows the lock status. The monitoring output can report lock status back to the access control panel. An unmonitored version is sold as EAAM10010.Key featuresHolding force up to 1200 lbsSelectable 12 or 24V DC supplyMonitored lock status outputRed and green status LEDAluminium housing with electroless nickel plated armatureSpecificationsOperating voltage: 12 to 24V DC (selectable)Holding force: up to 1200 lbsMounting: surfaceNet weight: 4.6 kgWarranty: 3 years..

ICS Mortice Magnet Monitored (U10000R)The ICS U10000R is a monitored mortice magnet with up to 600lbs holding force. Being mortice mounted, the magnet is set into the frame rather than fixed to its face.It runs on 12 or 24 Vdc from an aluminium housing. Monitoring reports the lock state back to the access control system. As a fail safe lock it releases when power is removed.Key featuresMortice mounted, monitoredUp to 600lbs holding forceRuns on 12 or 24 VdcAluminium housingFail safeSpecificationsModel: U10000RMagnet: 230 x 38 x 27 mm (l x w x d)Armature plate: 185 x 38 x 12 mm (l x w x d)Country of origin: Malaysia..

ICS Mortice Magnet Unmonitored - U10000The U10000 is an unmonitored mini mortice magnetic lock from ICS. As a mortice lock it is recessed into the frame, with the armature plate fitted into the door.It holds with up to 600lbs (272kg) of force from an aluminium housing and the armature is electroless nickel plated. The lock is fail safe, releasing the door when power is removed. The unmonitored design suits systems that do not need the lock state reported.Key featuresMortice mountingHolding force up to 600lbs (272kg)Aluminium housingElectroless nickel plated armatureUnmonitoredFail safeSpecificationsSupply: 12 or 24V DCMagnet size: 230 x 38 x 27 mmArmature plate size: 185 x 38 x 12 mm..

ICS Mortice Monitored Weather & Vandal Resistant Maglock, 12/24V DC - Power-to-Lock - 10000STRThe 10000STR is a monitored mortice magnetic lock from ICS, made in stainless steel to resist weather and vandalism. It is IP65 rated, so it can be used on external doors.The lock holds with up to 600lbs (272kg) of force and runs on 12 to 24V DC. It works on a power to lock (fail safe) basis, so the door releases if power fails. Monitoring reports the lock state to your access control panel. Mortice fitting keeps the lock inside the frame.Key featuresMortice mountingStainless steelIP65 weather resistantVandal resistantHolding force up to 600lbs (272kg)Monitored, fail safe (power to lock)SpecificationsSupply: 12 to 24V DC..

ICS Pair of Safety Straps for Maglocks (MAG55/2)These ICS safety straps fit both Mini and Standard magnets and their armatures, adding an extra level of safety to an ICS maglock installation. The MAG55/2 is supplied as a pair. Each strap retains the maglock or armature to its frame or bracket if a fixing bolt fails, so the unit cannot fall should it become dislodged.Key featuresFits mini and standard magnets and armaturesHolds the maglock or armature to its frame or bracket if a bolt failsStops the unit falling if it becomes dislodged, giving the installer peace of mindSupplied as a pairSpecificationsPart number: MAG55/2Country of origin: China..

ICS Polycarbonate Call Point Protector with Built-in Sounder - Comes with Red & Green Cover - SP2-WSSThe SP2-WSS is a polycarbonate cover from ICS that fits over a surface mounted call point. It helps cut down false fire alarms, whether they come from a deliberate prank or from someone knocking the call point by accident.The protector has a built in sounder to draw attention to the call point and it can be retrofitted over an existing device.Key featuresPolycarbonate constructionSurface mountBuilt in sounderCan be retrofitted over an existing call pointHelps prevent malicious or accidental false alarms..

ICS Red and Green LED Light Unit Narrow Style - Surface Mount - TLM100The TLM100 is an LED indicator light unit from ICS in a narrow style, for showing door status to users at a controlled door.It runs on 12 or 24V DC and the light programme can be adjusted. This is the surface mount version and comes with a black plastic surface back box.Key featuresLED indicatorNarrow style12 or 24V DCAdjustable programmeBlack plastic surface back box includedSpecificationsSize: 115 x 44 x 33 mm..

ICS Resettable Surface Double Pole BGU with Cover - Unlocked - CP32-G-LBThe CP32-G-LB is a green, resettable double pole break glass unit from ICS for surface mounting. It comes with a cover to protect against accidental use. Double pole contacts let one unit switch two circuits at the same time.Being resettable, the unit can be put back into service after activation without replacing a glass. It has a blue backlight.Key featuresResettableDouble poleSurface mountGreen, with coverBlue backlightSpecificationsSize: 87 x 91 x 53 mm..

ICS Safety end caps for mini magnets, pack of 5 - 5LD-MM-SCA pack of five safety end caps for ICS mini magnetic locks. The caps fit over the ends of the lock body, covering the exposed ends once the lock is mounted.Buying them as a pack is handy when fitting out several doors or replacing caps that have been lost or damaged.Key featuresSafety end capsFor ICS mini magnetsPack of 5Made by ICSSpecificationsModel: 5LD-MM-SC..

ICS Safety straps for magnetic locks - MAG-55The MAG-55 safety straps from ICS add an extra level of safety to ICS magnetic locks. They are made for both the mini and standard magnets and for the mini and standard armatures.Check which ICS magnet or armature is fitted on the door before ordering, so that the strap suits the size of lock on site.Key featuresSafety straps for ICS magnetic locksSuit mini and standard magnetsSuit mini and standard armatures..

ICS Sash Face Plate for 1700, 1500 and 1400 Series Strikes - Stainless Steel - 907XThe 907X is a stainless steel sash face plate from ICS for its 1700, 1500 and 1400 series strikes.Order it with a new strike or to replace a worn or damaged plate on an existing install. Check the series number on the strike before ordering so the plate matches the strike on the door.Key featuresSash face plateFits ICS 1700, 1500 and 1400 series strikesStainless steel..

ICS Shearlock Electromagnetic Door Lock - Monitored 30mm - GS705-30The GS705-30 is a monitored shearlock from ICS with a 30mm wide body. It reports lock status back to the access control system.A locking time delay, adjustable from 1 to 6 seconds, lets the door come to rest before the lock engages. The body measures 267 x 30 x 34 mm.Key featuresShearlockLock status monitoringAdjustable locking delay from 1 to 6 seconds30mm wide bodySpecificationsSupply: 12 or 24V DCHolding force: up to 2,700lbs in shearSize: 267 x 30 x 34 mm..

ICS Single Pole 5 Leaver Mortice Microswitch Deadlock - 3G114-SPThe 3G114-SP is a 5 lever mortice deadlock from ICS with a built in microswitch. The switch lets an alarm or access control system know when the deadlock has been thrown, confirming that a door is locked rather than just closed.It has a single pole with NO, NC and COM contacts. Check the case size and fixing positions against the door before ordering.Key features5 lever mortice deadlockBuilt in microswitchSingle pole with NO, NC and COM contactsMortice fitting..

ICS Sliding Adjustable L Brackets for Mini Maglocks - SDGIThe SDGI is a sliding adjustable L bracket from ICS for slimline magnetic locks. It is made from anodised aluminium and lets the lock slide backwards and forwards or be angled, so it can be lined up with the armature.A cavity and cut out in the bracket carry the cable, which makes wiring easier and keeps it protected. ICS supplies the bracket ready assembled with an anti tilt design. It does not need fixings into the underside of the transom and the magnet position can still be adjusted after commissioning.Key featuresSliding adjustable L bracketAnodised aluminiumAdjusts backwards, forwards and at an angleCable cavity and cut outSupplied assembled, anti tilt..