ICS

ICS Hinged double back box with AA57-PTE green dome button and MCP110 call point - Horizontal - DBB-H-04-110-HThe ICS DBB-H-04-110-H houses an AA57-PTE green dome exit button and an MCP110 call point in one green surface double back box. The two devices come fitted side by side in one horizontal hinged box, so the exit button and the emergency break glass unit sit together at the door. Because the unit arrives pre-assembled, installers can work with both hands free and spend less time on site.Key featuresMCP-110 breakglass unit: triple pole, resettable and illuminated, with a sounderAA57-PTE green dome button marked PRESS TO EXITPre-assembled, cutting on-site install timeLeaves both hands free during installationHorizontal mountingSpecificationsPart number: DBB-H-04-110-HFinish: green, surface mountPacked size: 29 x 10.5 x 8.5 cmPacked weight: 0.45 kgCountry of origin: China..

ICS Hinged Double Back Box with DRB-IR Infrared Exit Button and MCP110 Call Point - DBB-H-IR-110The ICS DBB-H-IR-110 houses a DRB-IR infrared exit button and an MCP110 call point together in a green surface double back box with a hinged design. It arrives pre-assembled, which cuts installation time on site and leaves both hands free while you work.The unit can be mounted horizontally or vertically. Please tell us which orientation you need when you order.Key featuresMCP-110 breakglass unit: triple pole, resettable and illuminated, with a sounder.DRB-IR infrared exit button marked DOOR RELEASE.Pre-assembled, so less time is spent installing on site.Leaves both hands free during installation.Mounts horizontally or vertically.SpecificationsFinish: green, surface mountDimensions: 29 x 10.5 x 8.5 cm (W x H x D)Packed weight: 0.45 kgCountry of origin: United Kingdom..

ICS Housing, 2 Metre Transom with 2 Cut Outs (ARCH2/2)The ICS ARCH2/2 is a 2 metre aluminium architectural housing for fitting maglocks into a transom. It is fitted horizontally and has two cut outs to take two slimline maglocks, which are sold separately. ICS lists the housing for use with its 10000, 10000R, U10000 and U10000R magnets.It comes complete with a mounting plate. Each magnet housed in it gives up to 600lbs of holding force.Key features2 metre aluminium housingHorizontal transom fittingTwo cut outs for slimline maglocksFor 10000, 10000R, U10000 and U10000R magnetsMounting plate includedSpecificationsLength: 2 metresHolding force: up to 600lbs per magnetMaterial: aluminiumMaglocks: sold separately..

ICS Housing, 2 Metre Vertical with 2 Cut Outs (ARCH2/2V)The ICS ARCH2/2V is a 2 metre aluminium housing for vertical fitting. Two cut outs take two slimline maglocks, which are sold separately. It is supplied complete with a mounting plate.Each magnet fitted in the housing gives a holding force of up to 600lbs. Check that the maglocks you plan to use suit the cut outs before ordering.Key features2 metre aluminium housingVertical fittingTwo cut outs for slimline maglocksMounting plate includedUp to 600lbs holding force per magnetSpecificationsLength: 2 metresMaterial: aluminiumMaglocks: sold separately..

ICS IP67 Rated External Monitored Maglock, 12/24V DC, 1200lbs (AGL1200NTBR)The ICS AGL1200NTBR is an external maglock with a holding force of up to 1200lbs (545kg). Its stainless steel housing is rated IP67 and the electronics are sealed, so it can be fitted on doors exposed to the weather.It runs on 12 to 24V DC. The lock is monitored, giving the access control system feedback on its state. It is fail safe, so it releases when power is removed.Key featuresExternal maglockHolding force up to 1200lbs (545kg)IP67 rated stainless steel housingSealed electronicsMonitoredFail safeSpecificationsVoltage: 12 to 24V DCIngress protection: IP67..

ICS Keeper plate for EB180 solenoid bolt - EB180-KEEPERThis is the keeper plate for the ICS EB180 solenoid bolt. The keeper fits to the frame or opposite door and receives the bolt when it throws, so it needs to match the bolt it works with.Order it as a replacement for a damaged keeper or as a spare when fitting EB180 bolts across a site.Key featuresKeeper plate for the ICS EB180Receives the solenoid boltReplacement or spare partMade by ICSSpecificationsModel: EB180-KEEPER..

ICS Key ring proximity tag, red or blue with printed number - KT-16The KT-16 is a key ring proximity tag from ICS for access control. It carries an EM chipset and has a number printed on it, which makes it easy to record which tag has been issued to which person.A key ring tag suits staff and contractors who would rather carry a fob on their keys than a card in a wallet. Confirm that your readers accept EM tokens before ordering.Key featuresKey ring proximity tagEM chipsetPrinted number on each tagFor access control systems..

ICS Magnet - External - Weatherproof - UGL1200NTBRThe UGL1200NTBR is an external grade ICS magnetic lock for doors that face the weather. Its housing is brushed stainless steel and the electronics are sealed, giving the unit an IP67 rating.It holds the door with a force of up to 1200lbs (545kg). Like other fail safe maglocks it needs power to hold, so the door releases when the supply is cut.Key featuresBrushed stainless steel housingSealed electronics rated IP67Holding force up to 1200lbs (545kg)Fail safe operationSpecificationsSupply: 12 or 24V DCMagnet size: 222 x 62 x 42 mm..

ICS Magnet Standard Double Unmonitored - U10060The U10060 is a double standard magnetic lock from ICS for pairs of doors. Two magnets sit in one aluminium housing, each giving a holding force of up to 1200lbs (544kg). The armatures are electroless nickel plated.This version is unmonitored, so the lock state is not reported back to the panel. It is fail safe, releasing the doors when power is lost.Key featuresDouble maglock for pairs of doorsTwo magnets, each holding up to 1200lbs (544kg)Aluminium housingElectroless nickel plated armaturesUnmonitoredFail safeSpecificationsSupply: 12 or 24V DC, selectableMaglock size: 532 x 67 x 40 mm..

ICS Magnet Standard Monitored - U10020The U10020 is a monitored standard magnetic lock from ICS for single doors. It holds with a force of up to 1200lbs (544kg) from an aluminium housing, paired with an armature plate finished in electroless nickel.Monitoring lets your access control system confirm the lock state and a red and green status LED shows it at the door. The supply voltage can be set to 12 or 24V DC. The lock is fail safe, so the door is released whenever power is removed.Key featuresHolding force up to 1200lbs (544kg)Aluminium housingElectroless nickel plated armatureMonitoredRed and green status LEDFail safeSpecificationsSupply: 12 or 24V DC, selectableMaglock size: 268 x 67 x 40 mm..

ICS Maintained Key Switch Double Pole - KS001-DPThe KS001-DP is a maintained key switch from ICS with a flush mounted brushed stainless steel plate. Being maintained, the switch stays in whichever position the key leaves it and the key can be taken out in both positions.It has two poles with change over contacts (COM, NO and NC), so one turn of the key can switch two separate circuits. The plate measures 85 x 85 mm.Key featuresMaintained actionDouble pole with COM, NO and NC contactsKey can be removed in both positionsBrushed stainless steelFlush mountSpecificationsSize: 85 x 85 mm..

ICS Micro Shearlock Electromagnetic Door Lock - 12/24V DC - SL500The SL500 is a micro shearlock from ICS. It can be mounted vertically or horizontally and runs on 12 to 24V DC.The lock reports its status back to your system. An adjustable locking time delay of 0.5 to 25 seconds gives the door time to settle before the lock engages. Outputs are NC, NO and COM. ICS makes a separate surface housing, the BR500, for this shearlock.Key featuresMicro shearlockLock status monitoringAdjustable locking delay from 0.5 to 25 secondsVertical or horizontal mountingNC, NO and COM outputsOperates on 12 to 24V DCHolding force: up to 2,600lbs in shear..

ICS Microswitched push bar, double pole, silver - PBA-860SThe ICS PBA-860S is a push bar for exit doors on access controlled routes. Pushing the bar operates internal changeover contacts, which can be wired to release a maglock or signal the door controller.The bar is made from aluminium with a silver finish and fixes to the surface of the door. Double pole contacts give COM, NO and NC terminals for wiring into the door circuit. The bar measures up to 860 mm in length.Key featuresAluminium construction with silver finishDouble pole switchingCOM, NO and NC changeover contactsSurface mountingSpecificationsSize (l x w x d): up to 860 x 60 x 62 mmNet weight: 2.2 kgCountry of origin: Taiwan..

ICS Mini Armature Housing - U320MThe U320M is a surface mount armature housing from ICS, made for its mini magnets. It has an aluminium finish.Check that your lock is an ICS mini magnet before ordering, as standard size locks use different accessories. If you are replacing a housing on an existing door, compare the part code on the old one with U320M.Key featuresArmature housing for ICS mini magnetsSurface mountAluminium finish..

ICS Mini Maglock Surface Mount 12/24vDC with Door Status Monitoring - FIRE RATED - FR-U10001DSUThe ICS FR-U10001DSU is a UK fire tested mini maglock for surface mounting on FD30 and FD60 doors. It runs on 12 or 24 VDC and holds with a force of up to 600lbs. As a fail safe magnetic lock it releases when power is removed.Its door status monitoring reports the state of the door rather than the state of the lock. It is rated for both FD30 and FD60 doorsets.Key featuresUK fire tested for FD30 and FD60 doors to BS EN1634:1.Gives 30 or 60 minutes of integrity performance under BS 476: Part 22: 1987 or EN 1634-1 without reducing the overall performance of the doorset.Door status monitoring.Aluminium housing with nickel plated armature.SpecificationsOperating voltage: 12 or 24 VDCHolding force: Up to 600lbsMagnet: 250 x 42 x 26 mm (L x W x D)Armature plate: 180 x 38 x 11 mm (L x W x D)Net weight: 1.5 kgCountry of origin: Malaysia..

ICS Mini Mortice Maglock, weather and vandal resistant, 600lbs HF, 12/24V DC - 10000STThe 10000ST is a mini mortice magnetic lock from ICS built to stand up to weather and tampering. Its stainless steel body is rated IP65 and the unit is vandal resistant.It holds with up to 600lbs (272kg) of force and runs on 12 to 24V DC. The lock works on a power to lock basis (fail safe), so the door is released if the supply drops. As a mortice fitting it sits inside the frame rather than on the surface.Key featuresMortice mountingStainless steelWeather resistant to IP65Vandal resistantHolding force up to 600lbs (272kg)Fail safe (power to lock)SpecificationsSupply: 12 to 24V DC..

ICS Mini Stainless Steel Vandal Resistant Maglock- IP65 rated - N10001STThe N10001ST is a mini magnetic lock from ICS with a stainless steel housing, designed for doors exposed to weather or rough treatment. It is rated IP65 for weather resistance and is vandal resistant.The lock gives a holding force of up to 600lbs (272kg) and runs on 12V DC. This is the unmonitored version, for installs that do not need lock status reported back to the panel. It is fail safe, so the door releases when the power is removed.Key featuresStainless steel housingIP65 weather resistantVandal resistantHolding force up to 600lbs (272kg)UnmonitoredFail safeSpecificationsSupply: 12V DCSize: 44 x 27.5 x 218 mm..

ICS Mini Surface Mount Maglock, Monitored with Door Status, 600lbs, Fire Rated (FR-U10002DSU)The ICS FR-U10002DSU is a fire rated mini surface mount maglock with door status monitoring. It runs on 12 or 24V DC and holds with up to 600lbs of force. ICS states it gives 30 or 60 minutes of integrity performance with no reduction in the overall doorset performance under BS 476: Part 22: 1987 or EN 1634-1. The lock is fail safe, so it releases when power is removed.Key featuresOperating voltage: 12 or 24 VDCAluminium finishHolding force: Up to 600lbsFire ratedDoor Status MonitoringFail safeSurface mountSpecificationsMagnet: 250 x 42 x 26 mm (l x w x d)Armature plate: 185 x 38 x 12 mm (l x w x d)Gross weight (packed): 2kgCountry of origin: Malaysia..

ICS Mini Surface Mount Maglock, Monitored, 600lbs HF, 12/24V DC, Fire Rated (FR-U10002)The ICS FR-U10002 is a UK fire tested mini monitored maglock for surface mounting, rated FD30 and FD60 under BS EN1634:1.It runs on 12 or 24 VDC and holds with a force of up to 600lbs. As a fail safe lock it releases when power is removed. The magnet sits in an aluminium housing with a nickel plated armature. A status LED shows the lock state. An unmonitored version is available as FR-U10001.Key featuresUK fire tested to FD30 and FD60Tested to BS EN1634:1Monitored, with status LEDAluminium housing, nickel plated armatureRuns on 12 or 24 VDCUp to 600lbs holding forceUnmonitored version: FR-U10001SpecificationsModel: FR-U10002Magnet: 250 x 42 x 26 mm (l x w x d)Armature plate: 180 x 38 x 11 mm (l x w x d)Country of origin: Malaysia..

ICS Mini Surface Mount Maglock, Weather and Vandal Resistant, 600lbs HF, 12V DC (10001ST)The ICS 10001ST is a mini surface mount maglock built to resist weather and vandalism, for external doors and exposed locations.It runs on 12V DC and holds with a force of up to 600lbs. The body is brushed stainless steel. As a fail safe lock it releases when power is removed, so the door opens if power is lost.Key featuresWeather and vandal resistantSurface mount, mini sizeRuns on 12VdcBrushed stainless steelUp to 600lbs holding forceFail safeSpecificationsModel: 10001STMagnet: 250 x 42 x 26 mm (l x w x d)Armature plate: 185 x 38 x 12 mm (l x w x d)Country of origin: Taiwan..

Mini Surface Monitored Maglock with up to 600lbs holding force.Operating Voltage: 12~24 Vdc (Selectable)Aluminium housingHolding force: Up to 600lbsElectro-less Nickel Plated ArmatureFail-SafeStatus LED: Green and RedDimensions Magnet: 250(l) x 42(w) x 26(d) mmDimensions Armature Plate: 180(l) x 38(w) x 11(d) mm..