ICS

ICS 24v 5amp Switch Mode Power Supply Unit, Large Box (305 x 304 x 85) (PS5A-24-VL)The ICS PS5A-24-VL is a switch mode power supply that converts a 220V AC mains input into a 24V DC output at up to 5 amps. It is housed in a large metal box with a hinged, key lockable door that measures 305 x 304 x 85 mm.The supply includes a battery charging circuit with deep discharge protection, which helps keep locks and readers running through a mains failure and protects the battery from being run flat. LED indicators show the supply status at a glance. Add up the current draw of all connected devices before choosing your size.Key features220V AC mains input24V DC output, up to 5ABattery charging circuitDeep discharge protectionLED indicatorsLockable hinged metal boxSpecificationsOutput: 24V DC, 5ADimensions: 305 (h) x 304 (w) x 85 (d) mm..

ICS 24v DC mortice double monitored fail safe double swing electric lock, 1500lb HF, FIRE RATED (FR-ML350-24)The FR-ML350-24 is a fire rated mortice electric lock from ICS for double swing doors. It runs on 24V DC, works fail safe and is double monitored, so the access control panel can report on its status.The lock is made from stainless steel and offers 1500lbs of holding force with 500lbs of side load resistance. It carries FD30 and FD60 ratings and a one hour UK fire certificate, for use on fire doors. As a mortice lock it sits within the door and frame for a clean appearance. Check the door construction and certification needs before fitting.Key features24V DC operating voltageFail safeDouble monitoredFor double swing doorsFire rated to FD30 and FD60Stainless steelSpecificationsHolding force: 1500lbsSide load: 500lbsUK fire certificate: 1 hour..

ICS 24V DC Rim Mounted Electric Release (ER350-24)The ER350-24 is a 24V DC rim mounted electric release from ICS. It fits on the surface of the frame rather than being cut into it.The release can be set to fail safe or fail secure on site. Fail safe releases the door when power is removed, while fail secure keeps it locked, so you can match the behaviour to the door's role in the building. Check the voltage of your power supply and controller output before ordering.Key features24V DC operating voltageRim (surface) mountedSelectable fail safe or fail secure..

ICS 2500mm Vertical Pull Handle with 2 Slim Maglocks (PH800)The ICS PH800 is a 2500mm vertical pull handle with two slim maglocks and their armature plates built in. Combining the handle and the locks keeps the door clean of surface mounted magnets, with the armature fitted inside the handle and the wiring concealed. Each magnet holds with up to 275kg (600lb), runs on 12 or 24V DC and includes lock monitoring. Operation is fail safe, so the door locks while powered.Key featuresFail safe, power to lockSelectable 12Vdc or 24Vdc dual voltageSatin anodised aluminium finishConcealed wiringArmature fitted inside the handle2 integrated magnets and armature platesLock monitoringHolding force per magnet: up to 275kg (600lb)SpecificationsSize: 2500 x 90 x 65 mm (h x w x d)Net weight: 17.5kgCountry of origin: China..

ICS 25mm lip extension for GK series - LP025The LP025 is a 25mm lip extension for ICS GK series electric releases. It lengthens the lip for frames where the standard lip falls short.Key featuresAdds 25mm to the lipMade for the ICS GK seriesSpecificationsSize: 8.5cm (h) x 2.5cm (w) x 2cm (d)Model: LP025..

ICS 25mm lip extension for GK700 series - Black plastic - LP-GK700-25The ICS LP-GK700-25 is a 25 mm lip extension for the GK700 series. It extends the lip so the hardware can be set up where the standard lip is too short for the frame or gap.The extension is made from black plastic. It is an accessory only and is sold without the GK700 unit.Key features25 mm lip extensionFor the ICS GK700 seriesBlack plasticAccessory onlySpecificationsDimensions: 120 x 25 x 20 mmPackage weight: 0.06 kgCountry of origin: Taiwan..

ICS 2m adjustable L bracket for transom housing - 2MTL-10The 2MTL-10 is a 2 metre adjustable L bracket for ICS transom housings. It is made to suit the ARCH2-10, ARCH2-2-10 and ARCH2-2-10V housings, giving a solid fixing along the full length of the frame head.The bracket is anodised aluminium and is made in the United Kingdom.Key features2 metre adjustable L bracketSuits ARCH2-10, ARCH2-2-10 and ARCH2-2-10VAnodised aluminiumMade in the United KingdomSpecificationsLength: 200 cmModel: 2MTL-10..

ICS 2M L bracket for transom housing - 2MTLThe ICS 2MTL is a two metre L bracket for transom mounted housings. It is made to suit the ICS ARCH2, ARCH2/2 and ARCH2/2/V housings, giving them a fixing line along the door head.It is sold as a bracket only; the housing and lock are supplied separately.Key featuresL bracket for transom housingsSuits ICS ARCH2, ARCH2/2 and ARCH2/2/V2 m lengthBracket onlySpecificationsDimensions: 2000 x 60 x 60 mmPackage weight: 4 kgCountry of origin: United Kingdom..

ICS 2M Transom Housing, 2 cut outs with 2 x Standard Monitored Maglocks with Door Status, Horizontal (ARCH2/2/10MAG-DS)The ARCH2/2/10MAG-DS is a 2 metre ICS transom housing with two cut outs, supplied complete with two standard monitored maglocks with door status. It is fitted horizontally across the head of a double door opening.Each magnet offers 1200lbs (545kg) of holding force. Because the maglocks are monitored with door status, the access control system can report both whether each lock is engaged and whether the door is closed.Key features2 metre transom housingTwo cut outsTwo standard monitored maglocks includedDoor status monitoringHorizontal fittingSpecificationsHolding force: 1200lbs (545kg) per magnet..

ICS 54mm Keeper Plate for ML350 Monitored Electric Lock - ML350-54MM KEEPERThis is a 54mm keeper plate for the ICS ML350 monitored electric lock. The keeper is the plate fitted to the frame that the lock engages with.It is made from stainless steel.Key featuresKeeper plate for the ICS ML35054mm sizeStainless steelMade by ICSSpecificationsModel: ML350-54MM KEEPER..

ICS Adjustable L Bracket for Mini Maglock - U300ALThe ICS U300AL is an L bracket for mounting a mini magnetic lock. An L bracket lets the magnet be fixed under the door frame head when the lock cannot be screwed directly to the frame.The bracket has an aluminium finish to suit ICS mini maglocks. It is supplied on its own, without the lock or armature.Key featuresL bracket for mini maglocksAluminium finishSupplied without lock or armatureSpecificationsDimensions: 250 x 75 x 38 mmCountry of origin: Malaysia..

ICS Advanced Access Entry - Z&L Kit with Bracket for glass doors - A300ZLGThe A300ZLG is an ICS Z and L bracket kit made for glass doors. It lets a magnetic lock be fitted where the armature cannot be screwed into the door leaf.Key featuresZ and L bracket kitIncludes a bracket for glass doorsFor fitting a maglock to glassMade by ICSSpecificationsModel: A300ZLG..

ICS Alpro Cobalt-mini single lock and strike plate - ICS-YD30SThe ICS-YD30S is a motor driven door lock for doors that close at 90 degrees. It is designed to release on demand even when the door is under considerable side load.The lock can also draw a door that is slightly out of line back into position. It runs from low voltage power and low voltage control signals. This listing covers a single lock with its strike plate.Key featuresMotor driven lockingFor 90 degree doorsReleases under significant side loadCan pull a misaligned door into lineLow voltage power and signalsSpecificationsPackage weight: 0.75 kg..

ICS Alternative keeper plate only for ML350 - ML350-44MM-KEEPERThis is an alternative keeper plate for the ICS ML350. It is supplied on its own, without the lock, for installations where the standard keeper does not suit the door or frame.The plate is made from stainless steel and is 44 mm wide, with a length of 150 mm. Check the frame or door edge has room for this width before ordering.Key featuresKeeper plate only, for the ICS ML350Stainless steel44 mm wide150 mm longSpecificationsDimensions: 150 (l) x 44 (w) mmMaterial: stainless steel..

ICS ANSI Strike, 12/24v DC, monitored, short & long faceplate, fail safe/fail secure reversible, FIRE RATED (FR-GK450M-ST)The FR-GK450M-ST is a fire rated ANSI strike from ICS that runs on 12V or 24V DC. It is monitored and can be reversed between fail safe and fail secure.The strike is non handed and fully reversible, with a holding force of 1500lbs (680kg) and a brushed stainless steel finish. It is fire rated to FD30 and FD60 following UK testing and includes an intumescent strip. Both short and long faceplates are supplied to match the frame preparation. Check that the door's certification allows this type of strike before fitting.Key features12V or 24V DCMonitoredFail safe or fail secure, reversibleNon handedFire rated to FD30 and FD60 (UK tested)Short and long faceplates plus intumescent stripSpecificationsHolding force: 1500lbs (680kg)Finish: brushed stainless steel..

ICS ANSI Style Electric Release, Fail Safe, 12V DC (10145)The ICS 10145 is an ANSI style electric release for 12V DC systems. It operates fail safe, so power keeps the door locked and the door releases when power is removed.The release is made from stainless steel and measures 148mm high by 31mm wide. Fail safe releases are often chosen for doors on escape routes where the door must open if the power fails, though you should always check local fire and building requirements. The ANSI style body fits frames prepared for that common strike pattern. Confirm the frame cut out matches before ordering.Key features12V DC operationFail safe (power to lock)ANSI styleStainless steelSpecificationsDimensions: 148 (h) x 31 (w) mm..

ICS ANSI style release 12/24v DC unmonitored, short & long faceplate, fail safe/secure, S/S, FIRE RATED (FR-GK450-ST)The FR-GK450-ST is a fire rated ANSI style release from ICS for 12V or 24V DC systems. This is the unmonitored version, for installations where the controller does not need to read the strike state.It is non handed and fully reversible. It switches between fail safe and fail secure while offering 1500lbs (680kg) of holding force. The body is brushed stainless steel and the release is fire rated to FD30 and FD60 following UK testing. Short and long faceplates are supplied so you can match the frame. Check the door's certification before fitting.Key features12V or 24V DCUnmonitoredFail safe or fail secure, reversibleNon handedFire rated to FD30 and FD60 (UK tested)Short and long faceplatesSpecificationsHolding force: 1500lbs (680kg)Finish: brushed stainless steel..

ICS Architectural L Bracket with Cover for Mini Electromagnetic Door Locks - U300CLThe U300CL is an architectural L bracket with a cover for ICS mini magnetic locks. It mounts the lock where the frame does not give a flat face for the lock body. The cover hides the fixings for a cleaner look.The bracket has an aluminium finish to sit well alongside the lock.Key featuresArchitectural L bracketFor mini magnetic locksCover includedAluminium finishSpecificationsSize: 22.8cm x 3.8cm x 2.7cmModel: U300CL..

ICS Architectural L Bracket with cover for Mini Maglocks - 300CLThe ICS 300CL is an architectural L bracket for mini magnetic locks. Like a standard L bracket it lets the magnet be fitted under the frame head when the lock cannot be fixed directly, but it includes a cover for a tidier look.It is listed as an accessory for the ICS 10001, 10002, 10004 and 10005 mini maglocks and has an aluminium finish. The lock is supplied separately.Key featuresArchitectural L bracket with coverFor mini maglocksSuits ICS 10001, 10002, 10004 and 10005Aluminium finishSpecificationsCountry of origin: China..

ICS Architectural L Bracket with cover for Standard Maglocks - 500CLThe ICS 500CL is an architectural L bracket for standard size magnetic locks. It comes with the ICS 500AL adjustable L bracket, which carries the magnet under the frame head when the lock cannot be fixed directly to the frame.The architectural style adds a cover over the bracket for a neater finish on show doors. The lock is not included and is bought separately.Key featuresArchitectural L bracket with coverFor standard size maglocksIncludes the 500AL adjustable L bracketLock not included..

ICS Architectural Z & L bracket with cover - 300ZLDCThis architectural Z and L bracket from ICS is made for mini maglocks and comes with a cover, giving a cleaner look on doors where the fixings would otherwise be on show.It is made from anodised aluminium. ICS gives it a 3 year warranty.Key featuresArchitectural Z and L bracketFor mini maglocksCover includedAnodised aluminium3 year warrantySpecificationsDimensions: 255mm x 53mm x 50mmNet weight: 0.8 kgModel: 300ZLDC..

ICS Armature mounting plate for mini magnets - A-300BPThe A-300BP is a surface mounting plate for the armature of an ICS mini magnet. It gives the armature a firm, flat fixing on the door, which the maglock needs to hold properly.Fit it where the armature cannot be screwed straight to the door leaf. ICS covers the plate with a 3 year warranty.Key featuresArmature mounting plate for mini magnetsSurface fittingMade by ICS3 year warrantySpecificationsNet weight: 0.04 kgModel: A-300BP..