ICS

ICS 1 Metre L Bracket for Transom Housing 1MTLA one metre L bracket made to suit the ICS ARCH1 transom housing. It uses a 38 x 38mm profile and is listed as a maglock housing accessory.Please check that your installation uses the ARCH1 housing before ordering.Key features1 metre long38 x 38mm L profileSuits the ICS ARCH1 transom housingICS part 1MTLSpecificationsLength: 1 metreProfile: 38 x 38mm..

ICS 1 Metre Transom Housing, Single Cut Out (ARCH1)The ICS ARCH1 is a 1 metre architectural transom housing with a single cut out. It takes one ICS mini mortice maglock from the 10000 / 10000R series (AAM10000 or AAM10000R), sold separately.The slimline aluminium body is fitted horizontally on the transom and comes with its mounting plate, giving a tidy enclosed finish above the door. Paired with a suitable maglock it supports a holding force of up to 600lbs (272kg).Key featuresLength: 1 metre, slimline profileMade from aluminiumSupports up to 600lbs (272kg) holding forceFits horizontallyMounting plate suppliedOne cut out for 1 slimline maglock (sold separately)SpecificationsModel: ARCH1Product size: 110 x 7 x 5 cmNet weight: 2 kgCountry of origin: Malaysia..

ICS 12/24VDC Swing Through Electric Lock ML210N-SWThe ICS ML210N-SW is an electric lock made for double swing doors. It runs on 12V or 24V DC, with the voltage selected at installation.The lock can be set to fail safe or fail secure, so one model covers doors that must release on power loss as well as doors that must stay locked. Its compact body measures 210 x 25 x 46mm. Please confirm the door type and frame space before ordering.Key featuresFor double swing doorsSelectable 12V or 24V DC operationSelectable fail safe or fail secureCompact 210 x 25 x 46mm bodySpecificationsOperating voltage: 12/24V DC (selectable)Mode: fail safe or fail secure (selectable)Size: 210mm long, 25mm wide, 46mm deepPart number: ML210N-SW..

ICS 12v 1amp Switch Mode Power Supply Unit, Small Box, PS1A-12-VSThe ICS PS1A-12-VS is a switch mode power supply giving a 1A output at 12V DC from a 220V AC mains input. It is housed in a small metal box with a hinged lid that locks with a key.A built in charging circuit keeps a standby battery topped up. Deep discharge protection stops the battery being run flat. LED indication shows the unit's status at a glance.Key features12V DC output at 1A220V AC power inputBattery charging circuitDeep discharge protectionLED status indicationKey lockable metal boxSpecificationsOutput: 12V DC, 1AInput: 220V ACSize: 225mm high, 195mm wide, 80mm deepPart number: PS1A-12-VS..

ICS 12v 2amp Switch Mode Power Supply Unit, Large Box (305 x 304 x 85), PS2A-12-VLThe ICS PS2A-12-VL is a switch mode power supply giving a 2A output at 12V DC from a 220V AC mains input. It is housed in a large metal box that locks with a key.A built in charging circuit keeps a standby battery topped up. Deep discharge protection stops the battery being run flat. LED indication shows the unit's status at a glance.Key features12V DC output at 2A220V AC power inputBattery charging circuitDeep discharge protectionLED status indicationKey lockable metal boxSpecificationsOutput: 12V DC, 2AInput: 220V ACSize: 305mm high, 304mm wide, 85mm deepPart number: PS2A-12-VL..

ICS 12v 2amp Switch Mode Power Supply Unit, Small Box, PS2A-12-VSThe ICS PS2A-12-VS is a switch mode power supply giving a 2A output at 12V DC from a 220V AC mains input. It is housed in a small metal box with a hinged lid that locks with a key.A built in charging circuit keeps a standby battery topped up. Deep discharge protection stops the battery being run flat. LED indication shows the unit's status at a glance.Key features12V DC output at 2A220V AC power inputBattery charging circuitDeep discharge protectionLED status indicationKey lockable metal boxSpecificationsOutput: 12V DC, 2AInput: 220V ACSize: 225mm high, 195mm wide, 80mm deepPart number: PS2A-12-VS..

ICS 12v 3amp Switch Mode Power Supply Unit, Large Box (305 x 304 x 85), PS3A-12-VLThe ICS PS3A-12-VL is a switch mode power supply giving a 3A output at 12V DC from a 220V AC mains input. It is housed in a large metal box with a hinged lid that locks with a key.A built in charging circuit keeps a standby battery topped up. Deep discharge protection stops the battery being run flat. LED indication shows the unit's status at a glance.Key features12V DC output at 3A220V AC power inputBattery charging circuitDeep discharge protectionLED status indicationKey lockable metal boxSpecificationsOutput: 12V DC, 3AInput: 220V ACSize: 305mm high, 304mm wide, 85mm deepPart number: PS3A-12-VL..

ICS 12V 3A Switch Mode Power Supply Unit, Small Box (PS3A-12-VS)The ICS PS3A-12-VS is a 12V DC 3A switch mode power supply in a small metal box, running from a 220V AC mains input.The box is hinged and key lockable, keeping the supply and its connections secure. A built in battery charging circuit lets a standby battery be connected while deep discharge protection guards that battery. LED indicators show the state of the unit at a glance.Key featuresSwitch mode PSU, 12v 3amp, small boxInput: 220Vac mainsOutput: 12Vdc at 3AmpHinged metal box with key lockLED indicatorsBattery charging circuit with deep discharge protectionSpecificationsModel: PS3A-12-VSCountry of origin: China..

ICS 12v 5amp Switch Mode Power Supply Unit, Large Box (305 x 304 x 85), PS5A-12-VLThe ICS PS5A-12-VL is a switch mode power supply giving a 5A output at 12V DC from a 220V AC mains input. It is housed in a large metal box with a hinged lid that locks with a key.A built in charging circuit keeps a standby battery topped up. Deep discharge protection stops the battery being run flat. LED indication shows the unit's status at a glance.Key features12V DC output at 5A220V AC power inputBattery charging circuitDeep discharge protectionLED status indicationKey lockable metal boxSpecificationsOutput: 12V DC, 5AInput: 220V ACSize: 305mm high, 304mm wide, 85mm deepPart number: PS5A-12-VL..

ICS 12v 5amp Switch Mode Power Supply Unit, Small Box, PS5A-12-VSThe ICS PS5A-12-VS is a switch mode power supply giving a 5A output at 12V DC from a 220V AC mains input. It is housed in a small metal box with a hinged lid that locks with a key.A built in charging circuit keeps a standby battery topped up. Deep discharge protection stops the battery being run flat. LED indication shows the unit's status at a glance.Key features12V DC output at 5A220V AC power inputBattery charging circuitDeep discharge protectionLED status indicationKey lockable metal boxSpecificationsOutput: 12V DC, 5AInput: 220V ACSize: 225mm high, 195mm wide, 80mm deepPart number: PS5A-12-VS..

ICS 12v 7Ah Battery - B5/7The ICS B5/7 is a 12V DC sealed lead acid battery rated at 7Ah.Check the battery space in your power supply against the dimensions below before ordering.Key features12V DC7Ah capacitySealed lead acidSpecificationsVoltage: 12V DCCapacity: 7AhSize (h x w x d): 150 x 65 x 99 mm..

ICS 12V DC Mortice Double Monitored Fail Safe Double Swing Electric Lock, 1500lb HF - ML350The ICS ML350 is a dual monitored electric lock for double swing doors, running on 12 to 24Vdc. It fits inside the door as a mortice lock. Being fail safe, it releases when power is removed. Holding force reaches 1500lbs with 500lbs of pre-load, and dual monitoring lets the access control system see the lock's state. The lock weighs about 1.05 kg.Key featuresDual Monitored12-24Vdc500lbs Pre-LoadHolding Force Up To 1500lbsCurrent Draw 280mA @12VDCFire tested to BS EN1363-2 2012 and BS EN1634-1 2014EN14846This lock is fire rated. Where an intumescent pack is required, use the FR/ML350 instead.SpecificationsNet weight: 1.05 kgCountry of origin: Taiwan..

12Vdc standalone proximity reader with Bluetooth technology12Vdc operating voltageBlack ABS plasticBluetooth technologyInternal or external use5cm read range3 LED displays with audible indicationIP67 weather resistantFully programmable via master cardDimensions 114 x 80 x 18 mm..

ICS 12V DC Symmetrical Strike, Fail Safe, No Face Plate - 1411-12VDCThe ICS 1411-12VDC is a 12V DC electric strike body, supplied without a face plate. It works fail safe, meaning it needs power to stay locked and releases when power is removed.The strike is symmetrical, so it can be fitted for left or right hand doors. Its jaw is adjustable to take up small differences in latch position. It is suited to UPVC door frames.Key features12V DC operationFail safe (power to lock)Symmetrical bodyAdjustable jawSuits UPVC framesNo face plate includedSpecificationsDimensions: 75 x 35 x 25 mmCountry of origin: Spain..

ICS 12V Surface Mount Electric Release for Emergency Exit Latch or Push Pad (GK1279M)The ICS GK1279M belongs to the GK1279 series of surface mount electric rim strikes. It is made for emergency exit latches and push pads and suits indoor use.The body is stainless steel. Operation can be set in the field to fail-safe or fail secure. Because it mounts on the surface, no frame cutting is needed. It is non-handed and fully reversible with horizontal adjustment for lining up with the latch. A latch monitor output reports the latch state.Key features12V operationLatch monitorSurface mounted, no cutting of the frameNon-handed, fully reversibleHorizontal adjustment1,500 lbs static strengthBrushed stainless steel finishFail-secure or fail-safe, reversible in the fieldSpecificationsModel: GK1279MDimensions: 228.5 x 19 x 44.5 mm (h x w x d)..

ICS 12Vdc 3Amp Power Supply - PS12V-AC-3AThis ICS power supply runs from a 220V AC mains feed and gives a 12V DC output at up to 3 amps. Keep the total load of the connected equipment within 3 amps.The unit is housed in a clam shell enclosure.Key features220V AC mains input12V DC output3 amp rated outputClam shell enclosureSpecificationsInput: 220V ACOutput: 12V DC, 3ADimensions: 195 x 225 x 80 mmModel: PS12V-AC-3A..

ICS 12VDC ANSI Electric Release with Long and Short Faceplate (GK310LS)This ANSI style electric release runs on 12V DC and has a jaw that was pull tested to 2000lbs. It can be set to fail safe or fail secure on site, so the same unit suits doors that must release on power loss as well as doors that must stay locked.Two faceplates come with it: a long plate measuring 202 x 36.5 x 33 mm and a short plate measuring 124 x 31.8 x 33 mm. Having both in the box lets an installer match the strike to the existing frame preparation without ordering a separate plate. Check the depth of the frame cut out before fitting.Key features12V DC operating voltage2000lbs jaw strength in pull testingSelectable fail safe or fail secureLong and short faceplates suppliedANSI style releaseSpecificationsLong faceplate: 202mm long, 36.5mm wide, 33mm deepShort faceplate: 124mm long, 31.8mm wide, 33mm deep..

ICS 12VDC ANSI Electric Release with Long and Short Faceplate, Monitored (GK310MLS)The GK310MLS is the monitored version of the ICS 12V DC ANSI electric release. Monitoring lets a connected access control panel report the state of the release.The jaw was pull tested to 2000lbs and the unit can be switched between fail safe and fail secure during installation. Both a long and a short faceplate are included, giving you a choice to suit the frame. Confirm your controller has a spare input for the monitoring output before ordering.Key featuresMonitored electric release12V DC power input2000lbs jaw strength in pull testingFail safe or fail secure, selectable on siteLong and short faceplates includedSpecificationsLong faceplate: 202mm long, 36.5mm wide, 33mm deepShort faceplate: 124mm long, 31.8mm wide, 33mm deep..

ICS 12Vdc Fail-safe Monitored Solenoid Bolt (SL165A)The SL165A is a 12V DC solenoid bolt from ICS with a die cast metal body. It operates fail safe and is monitored, so a connected controller can report the bolt state.The bolt has a 14mm throw and a diameter of 12.7mm. It will work across a maximum door gap of 6mm. A built in timer can be adjusted between 0 and 3 seconds to set how long the bolt stays withdrawn after a release signal. The bolt draws 570mA at 12V DC. The monitoring output is a normally closed contact. Measure the gap between door and frame before ordering.Key features12V DC operating voltageFail safe operationMonitoredAdjustable timerDie cast metal constructionSpecificationsThrow: 14mmBolt diameter: 12.7mmMaximum operational door gap: 6mmCurrent draw: 570mA at 12V DCTimer range: 0 to 3 secondsMonitoring: N/C contact..

ICS 12Vdc Timer relay (MT-RELAY)The ICS MT-RELAY is a 12V DC timer relay with an adjustable period from 0 to 30 seconds. It gives one output with normally open, normally closed and common contacts.A timer relay like this is handy when a device only gives a brief pulse but a lock needs to stay released for longer, for example when an exit button or intercom should hold a door open for a few seconds. Check the trigger type of the device you are connecting before installing.Key features12V DC power inputAdjustable timing from 0 to 30 secondsOne output with NO, NC and COM contacts..

ICS 1800lbs Face Fix Electromagnetic Door Lock (Maglock), External, 12/24V DC (GL-1800F-10TB)The GL-1800F-10TB is a face fix electromagnetic lock from ICS with up to 1800lbs (818kg) of holding force and a stainless steel body. It runs on 12V or 24V DC and is rated IP67, so it is built for external doors and gates exposed to the weather.As a maglock it works fail safe: the door holds while power is applied and releases when power is cut. The magnet measures 72 x 284 x 47.5 mm and the armature 70 x 250 x 16 mm, so check the space on your frame and door before ordering. ICS designs this high security magnet for face mounting on sliding doors. It is vandal resistant and is suited to secure gates, including those on prison sites.Key featuresUp to 1800lbs (818kg) holding force12V or 24V DCIP67 rated for external useStainless steel, vandal resistantFace mounting on sliding doorsFail safeSpecificationsMagnet: 72 (w) x 284 (l) x 47.5 (d) mmArmature: 70 (w) x 250 (l) x 16 (d) mm..

ICS 2 Meter slimline transom housing with rounded corners (ARCH2/2-RC)The ARCH2/2-RC is a 2 metre slimline transom housing from ICS with rounded corners. It is made from aluminium and fits horizontally across the head of a door opening, giving a neat finish for maglocks on double doors.There are two cut outs, with a listed holding force of 600lbs (274kg). The housing comes complete with a mounting plate. An extended top plate is available as an option. The housing is intended for use with the 10000, 10000R, U10000 and U10000R maglocks. The housing measures 2000 x 50 x 50 mm. Check the width of your opening and the clearance above the doors before ordering.Key features2 metre slimline housingRounded cornersAluminium constructionHorizontal fittingTwo cut outsSupplied with mounting plateSpecificationsHolding force: 600lbs (274kg)Dimensions: 2000 x 50 x 50 mm..

ICS 24v 1amp Switch Mode Power Supply Unit, Large Box (305 x 304 x 85) (PS1A-24-VL)The ICS PS1A-24-VL is a switch mode power supply that converts a 220V AC mains input into a 24V DC output at up to 1 amp. It is housed in a large metal box with a hinged, key lockable door that measures 305 x 304 x 85 mm.The supply includes a battery charging circuit with deep discharge protection, which helps keep locks and readers running through a mains failure and protects the battery from being run flat. LED indicators show the supply status at a glance. Add up the current draw of all connected devices before choosing your size.Key features220V AC mains input24V DC output, up to 1ABattery charging circuitDeep discharge protectionLED indicatorsLockable hinged metal boxSpecificationsOutput: 24V DC, 1ADimensions: 305 (h) x 304 (w) x 85 (d) mm..

ICS 24v 3amp Switch Mode Power Supply Unit, Large Box (305 x 304 x 85) (PS3A-24-VL)The ICS PS3A-24-VL is a switch mode power supply that converts a 220V AC mains input into a 24V DC output at up to 3 amps. It is housed in a large metal box with a hinged, key lockable door that measures 305 x 304 x 85 mm.The supply includes a battery charging circuit with deep discharge protection, which helps keep locks and readers running through a mains failure and protects the battery from being run flat. LED indicators show the supply status at a glance. Add up the current draw of all connected devices before choosing your size.Key features220V AC mains input24V DC output, up to 3ABattery charging circuitDeep discharge protectionLED indicatorsLockable hinged metal boxSpecificationsOutput: 24V DC, 3ADimensions: 305 (h) x 304 (w) x 85 (d) mm..