Search

Multi-format P50 reader Reads MIFARE® tokens Reads EM4100 tokens Reads Net2 tokens Low profile - less than 16mm deep About – The Proximity P series MIFARE® reader is suitable for use with Net2 systems. The reader is multi-format and can be used with a choice of access tokens both 125Khz and 13.56MHz including MIFARE®Classic protocol ISO 14443A as well as EM4100 and Paxton Net2 tokens. The reader is supplied with a black fascia only.  Operation – A token is read by holding it within close proximity of the reader. Once a token has been read the control unit looks up the access permissions of that user. Access is then granted or denied as appropriate. If access is granted the green LED flashes. If access is denied the red LED flashes. Now including Genuine HID Technology in the P50 Mifare readers, will now read HID 125kHz Proximity tokens when licensed with an activation card. If required these readers can still be enabled to have Wiegand output, via a separate activation card...

No software install is required, the desktop reader works out-of-the-box Quick and straightforward user registration Simple USB connection Reads Paxton, MIFARE®, HID™ Prox, EM, FeliCa, NFC and DESFire token technology About – The Paxton10 Desktop Reader supports all token formats with no additional configuration required, making it simple to add tokens to your system. Installation – Connect the desktop reader to a free USB port and log in to the Paxton10 software via the web browser. Operation – When a new token is presented to the reader, a new user record is automatically loaded for user details to be added and access permissions assigned. Should the presented token already exist in the system, the assigned user’s data will appear.  ..

Please note that PAC have changed the shape of these PAC Stanley Proximity Tokens - The (black) 21087 fob has been replaced with the 21024 (also known as 909021024) so your fobs may look different  tothe version shown. These tokens are fully compatible with PAC access solutions including:EasikeyPAC500 Series ControllersOneProx ReadersPAC for WindowsEasikey ManagerEasiNetTM ResidentialSecureNetTMGDX IndigoGDX Concierge Systems..

..

..

..

..

IK10 rated for ultimate impact resistance Reads Paxton, MIFARE®, HID™ Prox, EM, FeliCa, NFC and DESFire token technology Built-in Bluetooth® wireless technology, allowing the use of smart devices IP67 rated for external use in all conditions Compatible with Paxton10 controllers only The Paxton10 Vandal Resistant Reader is the perfect choice for locations where the reader is subject to heavy usage and potential damage. With a market-leading IK10 impact rating, waterproofing to IP67, and a rugged metal surround with four security fixings, this reader is built to withstand the most challenging environments. Equipped with multi-format reading technology, the Paxton10 Vandal Resistant reader is designed to simultaneously read various types of cards and tokens, including Paxton, EM, MIFARE® DESFIRE® CSN, HID® Prox 125kHz, FeliCa, and NFC. During installation, the colour-coded reader wires can be easily connected to a Paxton10 Door or Video controller. It's important to avoid mounting the reader on metal surfaces or near other proximity readers to prevent any impact on the read range. The centrally located cable exit at the back of the reader ensures precise drilling and mounting. The reader comes with 5 meters of cable and can be extended using Belden 8723 cable. In operation, a token is read by holding it in close proximity to the reader. Once the token is read, the control unit checks the access permissions of the user and grants or denies access accordingly. Additionally, the reader supports three Bluetooth® operating modes for use with smart credentials: token, touch-to-enter, and long range.    ..

Suitable for P50 reader only..